Little to none.. changing cars to E85 and injectors to 1100, etc
Didn't share it long
Funny ,, you guys talking about turbos in the US and the guys are talking about the turbos in AUS>.. Looking at the...
A type II is for a 8 bit board and Type III for a 16 bit board . If you don't know which one you have take the cover off and if you have a KNOCK...
I use a 300 degree fuel rain and all SS lines with areomotive filter and fpr, then SS lines to the tank..NO DAMPER I now want to change to the...
The recommended way to do a FULL FLUSH is to disconnect the lines to your cooler and push in one side and drain from the other.. Here in the...
If your brake band was shot and it was just rebuilt.. Who ever rebuilt it failed to adjust the band correctly..sounds also like your servo piston...
OD doesn't have as much strain on it as High Gear (3rd) .. I doubt the frictions are gone..but you could have a seal out..the other alternative is...
Here in the states, the very early 89.5 had no drain plug but later models did.. In either 93 or 94 the pan was also made with ribs in it...
You can use longer bolts to align and help on stabbing it in.. One above the starter and the other on the drivers side. Once you have the bolts in...
Eprom upgrades for the Z, stock injectors to 850, single to dual intake, auto or manual ,, $50 US shipped Priority mail email...
How bout the ECU ?
Coz, has his own z plus several guys in the AZ area work on them there.. He is knowledgeable ....
Thanks
Separate names with a comma.