:zlove: **300ZX FRONT MOUNT INTERCOOLER GROUPBUY** :zlove:

Re: need help

check the bottom of the black thing. the tube coming off mine were loose/.. so i just blocked them with some bolts ^^^^see pic

 

Got mine today.....

the neighbour signed for it cos the dogs wouldn't let the delivery man in the gate

It's certainly a BIG BASTARD!!!

Thanks James :thumbsup:

 

All Good

What a dipshit! i figured i had it backwards after i saw taht post last night, thougt it was a bit hard to fit that side.... cheers James working fine now. just have to mod the Bomex bar as its a bit narrow.
Thanks for all your hard work James the kit looks awsome. bet your glad its over though hey.

 

guys pls post pics of your pod filter setup!!!

 

Filter

Mafi I don't have a camera, but my pod filter is the same as James's although i dont have as much room, i think it must be a bit bigger. i loosened the two ends of t-piece and twisted that towards the engine as much as possible before re-tightening then i was able to squeeze the AFM and filter in behind... Just. its really jammed up close to the cooler.

 

Re: All Good

HAHAHHAHAHAHAHAHA:LOL::LOL::LOL: Glad it's running fine now.

 

Re: guys pls post pics of your pod filter setup!!!

Heres another setup-->>

 

Couple of quick ones...

Has anyone who's installed their cooler managed to squeeze the apexi power intake pod in behind the cooler without modding the piping?

Also for those who have already done their install.... What did everyone do with their reo bar? Cut and keep it in there? Or just get rid of it? Still not sure which way to go with this. Would prefer to keep it really, but any more feedback would be appreciated.

Cheers

Justin

 

james the fmic in that pic has a thinner core and the mounts are closer

to the begining of the fmic, the fmic we've been supplied sits about 3cm further in than that one and theres no way in hell that same elbow joint will fit into babbbs car...

 

Re: james the fmic in that pic has a thinner core and the mounts are closer

Guys, has anyone put their pod under a head light? Would love to see that setup

 

hold up....

Hang on a tick..... you say pipes with the bends are for the top.... but in that second picture the longer flat pipe is going to the top of the cooler??

****EDIT, don't worry, thought you meant the elbow bend pipes, now understand****

 

YAY!!!!!!!!!!!!!!!!!!!!!!!!

Got mine today!!!! MAn thats massive...
well actually received the card from postie yesterday but card was wedged between the other mail......

thanks alot jamez!!!!!!!!!
i don't think words are enough to show my graditude for ALLLLL your efforts....

next time im down in SA... gotta buy u heaps of drinks....

 

is anyone concerned.... or is it a problem....

that the pod filters are not getting enough cool air sitting behind the cooler????????

 

YEW! Picked mine up this arvo!

LOVE IT!!!! Packaging survived the trip over and everything is sweet!

Thanks a billion james, i'll get my mrs to give u a suck if ur in perth one day! hahahahaha :LOL: Cheers mate!

 

Thanks a million James

These things look awsome.... It all finally paid off... When your in Sydney i WONT suck you off but show you the scenes a bit haha:LOL::LOL::LOL:

Further more if you know your coming give me some notice and we can organise an event for you...

Thanks Terry

 

Rad Cooling.

Hey, I had a thought, with putting a fmic on behind a stock front bar (skirt or whatever its called) would the bar block alot of cooling to the fmic, also how about the radiator with the front bar already blockin alot of the ic, would it have a great effect on the radiator?

 

Thanks James...

Hi James, I got my Kit today, I was excited. The FMIC is good. I thought the pipes were good, but I happen to have a roommate who is a professional welder. He laughed at the pipes and told me that they won't last long with high pressure flowing (alot of porosity/weak points). So I will try to get them fixed or something before installing them.

Thanks for your efforts James. You tried your best.

 

HAHA

ummmmm... please post a pic first :LOL::LOL:

 

Re: is anyone concerned.... or is it a problem....

Isn't that what the FMIC is for??:wacko:

 

Re: Thanks James...

Your kidding me right?????? The pipes have been tig welded.

I'm going to pressure test the pipes and take a video for you to give your pro welder roomie.

:wacko::wacko::wacko::wacko: