EOI - Unorthodox Racing Ultra Sc Series Crank Pulleys

Discussion in 'Group Buys' started by ZDUCTIV, Jul 31, 2007.

Thread Status:
Not open for further replies.
  1. ZDUCTIV

    ZDUCTIV Active Member

    People interested in crank pulley:
    1. ZDUCTIV
    2. CurnZ
    3. MikeZ32
    4. XZX007
    5. akeizm
    6. JamesZX
    7. Jeffro
    8. mafi-zed
    9. Martin
    10. Renegauge
    11. RENZED
    12. pdzor
    13. kr4usy

    People interested in other accessory pulleys :
    1. ZDUCTIV: NA Power Steering, TT Alternator, TT Water Pump
    2. CurnZ: NA Power Steering, TT Alternator, TT Water Pump
    3. XZX007: NA Power Steering, TT Alternator, TT Water Pump
    4. Hyper101: NA Power Steering, TT Alternator, TT Water Pump

    If people would add their names to the list, that'd be great! That way I don't have to post whore up this thread. Also, get anyone you can involved. WE NEED PPL! Haha
     
  2. Martin

    Martin New Member

    the way its looking it doesnt seem like we're gonna get enough people, maybe you could try to get a business to fill the numbers and then sell them off at a modest profit...looking at you caz :p
     
  3. mafi-zed

    mafi-zed the resident hoon

    realisticly will we see 10rwkw with this?
     
  4. ZDUCTIV

    ZDUCTIV Active Member

    There isn't much I can do but provide dyno's of the evidence... See earlier in the thread.

    I had considered that, and would be open to it. I really don't care how I get this pulley done, I just want it. Heh.
     
  5. topher

    topher Banned

    this has probably been asked/answered before but will this give me the same power as say a GFB UDP? if its about the same im in 100% and for the other ones too (full set for TT)
     
  6. ZDUCTIV

    ZDUCTIV Active Member

    Perhaps 2-3whp less due to no underdriving.
     
  7. LaZZaR

    LaZZaR Member

    am i too late?

    Put me down for one please?
     
  8. ZDUCTIV

    ZDUCTIV Active Member

    Nope. I almost closed this because I didn't think we would get enough numbers, but I am starting to pursue other options.

    1. ZDUCTIV
    2. CurnZ
    3. MikeZ32
    4. XZX007
    5. akeizm
    6. JamesZX
    7. Jeffro
    8. mafi-zed
    9. Martin
    10. Renegauge
    11. RENZED
    12. pdzor
    13. kr4usy
    14. topher??
    15. LaZZaR

    People interested in other accessory pulleys :
    1. ZDUCTIV: NA Power Steering, TT Alternator, TT Water Pump
    2. CurnZ: NA Power Steering, TT Alternator, TT Water Pump
    3. XZX007: NA Power Steering, TT Alternator, TT Water Pump
    4. Hyper101: NA Power Steering, TT Alternator, TT Water Pump
    5. topher??: TT Power Steering, TT Alternator, TT Water pump

    One more person and we are 40% of the way!
     
    Last edited: Aug 22, 2007
  9. Babbb

    Babbb New Member

    I'll be interested in a full set if it happens any time soon... but as you mentioned numbers are looking a little on the light side :confused: But yer.... chuck me on the list anyway

     
  10. ZDUCTIV

    ZDUCTIV Active Member

    When (if?) it happens all depends on numbers. As soon as we have close to 40 I'll start taking payments and organising with UR to begin production.

    Babbb: are you TT or NA?

    1. ZDUCTIV
    2. CurnZ
    3. MikeZ32
    4. XZX007
    5. akeizm
    6. JamesZX
    7. Jeffro
    8. mafi-zed
    9. Martin
    10. Renegauge
    11. RENZED
    12. pdzor
    13. kr4usy
    14. topher??
    15. LaZZaR
    16. Babbb

    People interested in other accessory pulleys :
    1. ZDUCTIV: NA Power Steering, TT Alternator, TT Water Pump
    2. CurnZ: NA Power Steering, TT Alternator, TT Water Pump
    3. XZX007: NA Power Steering, TT Alternator, TT Water Pump
    4. Hyper101: NA Power Steering, TT Alternator, TT Water Pump
    5. topher??: TT Power Steering, TT Alternator, TT Water pump

    40% of the way!

    And for people questioning the gains on the NA, our very own macman dyno'd before and after and gained 6rwkw (~8whp) so it's very close to the claimed 10whp for NA.

    See here
     
    Last edited: Aug 22, 2007
  11. ZDUCTIV

    ZDUCTIV Active Member

    1. ZDUCTIV
    2. CurnZ
    3. MikeZ32
    4. XZX007
    5. akeizm
    6. JamesZX
    7. Jeffro
    8. mafi-zed
    9. Martin
    10. Renegauge
    11. RENZED
    12. pdzor
    13. kr4usy
    14. topher??
    15. LaZZaR
    16. Babbb

    People interested in other accessory pulleys :
    1. ZDUCTIV: NA Power Steering, TT Alternator, TT Water Pump
    2. CurnZ: NA Power Steering, TT Alternator, TT Water Pump
    3. XZX007: NA Power Steering, TT Alternator, TT Water Pump
    4. Hyper101: NA Power Steering, TT Alternator, TT Water Pump
    5. topher??: TT Power Steering, TT Alternator, TT Water pump
    6. Babbb: TT Power Steering, TT Alternator, TT Water pump
     
  12. yeti

    yeti New Member

    ANyone know flywheel weight & size

    if the gain is all about the rotating weight reduction, how does this compare with lightening the flywheel? Like how heavy is stock flywheel and how much weight do people take off it?

    Does an underdriven pulley require shorter belts? That would be another big cost advantage.

    Just so I can decide if I shuld get one.
     
  13. ZDUCTIV

    ZDUCTIV Active Member

    Stock flywheel is ~10.5kg
    My RPS flywheel is ~5.5kg.
    I believe JUN is around that same weight.

    My RPS cost 520$AUD +shipping (expensive) for a similar amount of weight being removed, whereas this pulley will cost around ~290$AUD delivered I think I said (may be slightly more now due to weakening of AUD vs USD recently.

    Installation of a lightweight crank pulley is comparatively simple to having to drop the gearbox to do a flywheel install.

    If I was choosing only one I know which one I'd choose.

    Yes it does, and yes it is.
     
    Last edited: Aug 23, 2007
  14. ZDUCTIV

    ZDUCTIV Active Member

    For comparison to similar products on the market, UAS suppliers a stock sized lightweight crank pulley.

    It weighs in at 1.7kg and costs $450 + shipping.

    [​IMG]

    Ours should come in around the 1kg mark, and should cost less than $300 shipped. Whatever the cost price is, is what you will pay, so it could be significantly cheaper than this. My calculations before put it at $290 delivered to the east coast. $270 pickup for WA people.

    Just throwing the info out there.
    :zlove:
     
  15. yeti

    yeti New Member

    Im in then

    Put me on the list too.

    Seems too good to miss considering its almost as good as a lighter flywheel but only about $300 and an easy fit.

    I hope we get enough peole in, but maybe many have already got a UDP fitted in thier car?
     
  16. MikeZ32

    MikeZ32 das Über member

    most likely, it's one of the more cost effective mods. i couldn't be arsed with the regular UR pulley since you need belts and waterpump pulley. this is a much easier solution.
     
  17. ZDUCTIV

    ZDUCTIV Active Member

    Of the people I've talked to, the reasons for not entering the GB are either they already have a underdrive pulley, or they don't have the $.

    I'm still considering buying an extra 10 pulleys and selling them at a later stage, so we are either almost half way there, or 3/4 of the way there.

    Anyways, here are the lists:

    1. ZDUCTIV
    2. CurnZ
    3. MikeZ32
    4. XZX007
    5. akeizm
    6. JamesZX
    7. Jeffro
    8. mafi-zed
    9. Martin
    10. Renegauge
    11. RENZED
    12. pdzor
    13. kr4usy
    14. topher??
    15. LaZZaR
    16. Babbb
    17. yeti

    People interested in other accessory pulleys :
    1. ZDUCTIV: NA Power Steering, TT Alternator, TT Water Pump
    2. CurnZ: NA Power Steering, TT Alternator, TT Water Pump
    3. XZX007: NA Power Steering, TT Alternator, TT Water Pump
    4. Hyper101: NA Power Steering, TT Alternator, TT Water Pump
    5. topher??: TT Power Steering, TT Alternator, TT Water pump
    6. Babbb: TT Power Steering, TT Alternator, TT Water pump
     
  18. Ascension

    Ascension Active Member

    Well, I really want this whole set, but dollars and my main concern at the present. But if this goes on for a few more weeks then I never know what fortune the future may bring me ;)

    This isn't really an EOI just yet, well it is, but for the immediate future it's not gonna happen. Just thought i'd let you know there are other interested parties around that haven't spoke up as yet for whatever reason.

    Cheers
    Ben
     
  19. Babbb

    Babbb New Member

    I'm sure you're not alone in that situation. I can't believe more people haven't shown interest... usually cost effective, horsepower gaining type products get alot more interest than this has!!:confused:

     
  20. ZDUCTIV

    ZDUCTIV Active Member

    I'm sure if this group buy was for a body kit, or maybe some pieces of bling, then we would....

    :p
     
Thread Status:
Not open for further replies.

Share This Page