Recent Content by michaelZ

  1. michaelZ
    Post

    Trigger to control a big ass fuel pump

    As Silicon chip magazine authors I dabble in microcontrollers and electronics but the guys at this Australian magazine can certainly help you....
    Post by: michaelZ, Mar 31, 2016 in forum: Technical
  2. michaelZ
    Post

    96 TT Auto Cold Start Problems

    i would listen to the guys on this forum. The people on this forum know these cars best. i have used their advice to fix my Z many times. Just...
    Post by: michaelZ, Feb 11, 2016 in forum: Technical
  3. michaelZ
    Post

    random fuel cuts

    Check tacho. i assume you have done a visual check of fuel pump connections and ignition components connections. if these check out then when...
    Post by: michaelZ, Feb 9, 2016 in forum: Technical
  4. michaelZ
    Post

    Finally hooked up conzult :c

    Computer diagnostic do not find evey problem. Just a note to ConZult and all computer diagnostics. These are programs and as such respond to...
    Post by: michaelZ, Feb 4, 2016 in forum: Technical
  5. michaelZ
    Post

    Chasing bad idle

    Aftermarket Intercooler? Are the pipes crossed? Just a thought. Cheking the easy stuff first. Also I would check the Battery Voltage at Idle. I...
    Post by: michaelZ, Jan 12, 2016 in forum: Technical
  6. michaelZ
    Post

    Cutting out

    Not a problem. No need to feel bad. We are always learning. We are only assisting each other. We were all cluless once. It takes experience and...
    Post by: michaelZ, Dec 23, 2015 in forum: Technical
  7. michaelZ
    Post

    Cutting out

    Is it Fuel or Spark? i have read all posts so far and I cannot see if you have ascertained whether it is a fuel or spark issue. i suggest some...
    Post by: michaelZ, Dec 22, 2015 in forum: Technical
  8. michaelZ
    Post

    Brake Light issues.

    a neat trick that helped me. I too had this problem. The Nissan part was very hard to fit. I thought about it and then it dawned on me. I needed...
    Post by: michaelZ, Dec 11, 2015 in forum: Technical
  9. michaelZ
    Post

    z32 won't start with a code 13

    Did you remove the CTS while checking the ECU wires.... to verify that the 2300 ohms measured is in fact coming from the CTS sensor and not...
    Post by: michaelZ, Oct 13, 2015 in forum: Technical
  10. michaelZ
    Post

    Injector plugs - Fuel in cylinder

    Hydrolocked cylinder checked? So when you removed the sparkplug and cranked the engine it was it fuel that was expelled? Is this correct?...
    Post by: michaelZ, Sep 20, 2015 in forum: Technical
  11. michaelZ
    Post

    Zed overheating

    Why did you change the Hose? May i suggest that you may have a done a head gasket and may be the cause of the overheating. i suggest a check of...
    Post by: michaelZ, Aug 24, 2015 in forum: Technical
  12. michaelZ
    Post

    odd no start problems

    Try this. On the odd chance that the too low volts issue is caused by a shoddy earth connection, a test would be to use one jumper lead and...
    Post by: michaelZ, Aug 8, 2015 in forum: Technical
  13. michaelZ
    Post

    odd no start problems

    Is there enough petrol in the tank? I do not mean to be rude but it happened to me because I hardly use my car and forgot when I last put petrol...
    Post by: michaelZ, Aug 5, 2015 in forum: Technical
  14. michaelZ
    Post

    Early '89 ECU for '91 zed

    Use the FSM to check what is happening I suggest you use the FSM to check the signals and then back trace to find the cause. I suggest you start...
    Post by: michaelZ, Jul 24, 2015 in forum: Technical
  15. michaelZ
    Post

    Complete wiring help!

    What a mess..................... I gather you bought the car as in the pics. I would do as suggested. Another loom and reinstall. I hope you...
    Post by: michaelZ, Jul 1, 2015 in forum: Technical