Thanks Pics dont do it justice on how well proportioned the rear quarters are to the front guards now . After all ..the original front guards are now the quarters
If you want to upgrade the cap on your rad overflow tank to the mk 2 version have a chat with the JDM fella who was looking at doing the pwr steer tanks, I'm sure he can replace the cap with the nicer units for pretty cheap I could do it for about $60 for you but then it would cost twice that sending it over here and back
All my mounting points have been done ..Not just FUCA Car drives awesome and very streetable . You really have to be in it to understand the responsive power and handling stability it has Big Boys Go Cart :br:
not too much being happening ... Changed to penrite racing 10/40 2 weeks ago .. up to 1100kms now Been testing it on long trips ,in peak traffic etc 35 degree day.. temperature reaches 88 degrees stuck in traffic ,and goes back to 83 when moving this is with the extra underdriven accessory pulleys(oversized) and front mount. no oil coolers yet.. temps sit on 91 and get close to 100 after a thrashing pretty happy so far with its reliabilty and efficiency. saving for id2000cc to complete my flex fuel tune .
your going to have to run some pretty mean fuel pressures with those injectors, they dont like stock pressures
not with what Ive seen with E85 .. 50-55psi is fine..idles perfectly with boost you are around 75-80psi GTR recently tuned at 50psi base pressure with id2000cc but know what you are saying ..the higher the pressure the finer the spray mist.
Have started reinforcing my hatch for the APR wing. have cut 2 x 5mm flat bar and shaped it to the curves of the hatch . have cut out the internal supports to fit the flat bar to the hatch skin with 1mm neoprene in between . Have also welded (tacked on for now) another flatbar at right angles to support the rear section . this rear section with slight trim knotched out can be braced to chassis (on top of rear light panel with slight trim cut ) with trim back on all hidden test fitted and all good .. now to finish off all the welding. Beast with functional wing
No shit procky, how gooooood does it look! I love this pic Looks tough, cant wait to see it on the track Your zed is now what I aim for
Which is wonky? The bonnet or the guard? Looking really good though! Don't think I would be brave enough to run that spoiler on the street