Just something to look at, I had a bit of trouble finding NPT thread taps here, everything seems to be BSP. I guess worst case you could just buy one from the states and get it posted.
Your looking in the wrong places Peter. I can get all that weird stuff easy. Might get everyone to chip in a few bucks and we can send it around. They may do BSP adpators, I'll check it out. The difference between NPT and BSP is SFA anyway, a lot of thread tape and a big spanner and they go in easy.
Looks like red+black is OK for some fittings in the Jegs line. Couldn't find blue+black for Jinxed though. http://www.jegs.com/p/JEGS/830891/10002/-1/10019
For those who don't like the idea of tapping plennum's and whatnot here are the blingy clamp style ends. Clicky Personally not a fan, but never the less people will like the easy way out Suprisingly about the same price as the 'normal' fittings. And Mike, I saw those red and black ones. They are their fancy top of the line ones with mandrel bent elbows and whatnot. I think I need them
I have no idea what any of that means, so if you do up a kit for me with the least amount of work required to fit (ie no machining or tapping ) and ill be in. Cheers MrK
Please check the filtration rate on Competition Fuel Filters as well as the flow. Our stock filters are very good but many aftermarket ones don't filter fine enough or have sufficient surface area inside to catch crud without reducing flow quite quickly. JP explains it better in this post last year.. http://www.aus300zx.com/forum/showthread.php?t=260234&highlight=fuel+filters I remember Chewy saying that Aeromotive fuel filters were good....
I have one of those as well. I already have one installed and haven't had a problem with it, but wouldn't mind a second one to keep as a spare in the tool box. Polished finish with -6 ends.
Dash 6 90deg bends x20 dash 6 metric 10x1.5 adaptors x50 are you able to get me a price on these please.
I don't have time to put together kits or run this GB at the moment... I will be putting a order in at Summit Racing as I need some other stuff to make extractors, so if anyone wants any small bits to get chucked in with mine PM me. For those still after their braided line fix I suggest you get onto Caz. Mods, lock or do with it as you wish.
Definitely interested Definitely interested. Is this still happening???? Been looking for similar set up, at a reasonable price in Oz. Hard to find. Specifically im after about 3m of the black braided stuff to replace the oil cooler lines. Also black fittings. Will have to get my ruler out to check if its 8mm or 10mm, cant remember.
Not anytime soon, Aus dollar has dropped by heaps When I finally get off my arse and put in a order I'll let you know. Pacific Hoseflex are good, get a lot of gear off them and they are down the Gold Coast.