They are not touching here Is this bolted down? Kinda hard to tell the distance by this pic though. [IMG] Nobody ever said this was...
I really doubt the clutch plate was too thick, The TT pressure plate he has is designed to be used with a tt flywheel which has a factory .008"...
And the SBCNIS-1 on the flywheel is simply a part number, Has ABSOLUTELY nothing to do with the step.
Stock TT flywheel should have a raised .008" step which is what the southbend flywheels have for the TT. You just ruined the flywheel by putting...
Glad you like the shift mount Sandeep (I make them) MoulaZX I have never seen the bigger thread on ANY 300 or 350Z pivot balls, They are...
Guys if you are interested in the Aluminum pans I can probably hook up with a vendor here or in Aus somehwere to get you hooked up. Let me know if...
If you have a NA rear diff you probably can get away with a NA gear on a TT sensor, It will just fit tighter to the gear in the trans because of...
The sensor is offset differently because the NA gear is taller than the TT gear.
They are not the same, TT sensor is offset differently than a NA sensor to make up for the height difference of the gear NA vs. TT If you put...
Doesn't have to be heavy 2 things make up clutch TQ ratings, Pressure plate clamp load Disk material How the pressure plate is modified...
Figured I would bring up the past a bit ;) I am having a big run of the rear SS shields made. If there is still interest in these let me know....
This is for LHD guys, I would never make something dangerous. This is also removable for if you have a passenger so nobody gets hurt. This...
Bah ;) [IMg]
I sent one of you guys an e-mail, I am totally up for a GB if you guys want to do it. Let me know and we can set something up.
Separate names with a comma.
