ZED PARTS FOR SALE!! NEW AND USED!! W/ PICS

Ok, I've finally bit the bullet and I'm selling my zed after over 3 years of ownership :zlove: :zlove:

I have a big fat AMEC bill this week (nearly 2k) so looking to sell these parts as I either won't be fitting them to the car or don't need them..
I am in Brisbane and postage is at buyer's expense.

New Parts: When I say new I mean not even opened from their original packaging..

- UAS Front Bar w/ speed holes - $480.

This was from the GB run awhile back but as I have been away and come back deciding to sell I won't be needing this anymore. Its still at UAS and I'm looking to recover my $100 deposit on it.
These were made up especially for the GB at the very special price of $480 (w/ speed holes - usually $595 RRP). They are a perfect fit for our cars unlike the cheap and crappy ones like carmate etc. They also have a slightly higher clearance compared to the GReddy bar which this is a copy of. This is the toughest front bar available IMHO. :zlove:
You won't find a better price than this, trust me..


- "SMITHY'S" design SS Braided Fuel line kit with Show Polished OEM Fuel Filter (red anodised ends) - $210 ($10 cheaper than Caz and I think she said she can't get them for awhile).


- Series 2 PTU - $270

- Thermal Flex Vacc./Boost Hose 6x4mm, 5x6mm & 1.5x8mm in red (replace all that old hose). - $80.

- Pex's Overdrive Water Pump Pulley (wise idea if you have or are going to install an underdrive pulley) - $160.


Defi BF gauges are some of the best gauges available (fully electronic, black out, opening ceremony etc.) I payed $900 for the 2 gauges and the control unit
- Defi-Link Meter BF Series Oil Temp Gauge - $250


- Defi-Link Meter BF Series Oil Pressure Gauge - $310


- Defi-Link Control Unit II - $150


Used Parts:

- Rear Hatch off later model ("Brazillian") ready to have infill panel fitted with rear wiper motor in good condition - no rust - $350 (bought this with the intention of doing brazillian but ended up getting full black hatch off someone as my cars black)


- Front Indicators - $50 each (in excellent condition)


- Side Indicators (on front bar) were painted black when I got the car (can anyone use paintstripper..) $50 each (could leave them black as they have good paint?)


- Rear Taillights (Blacked out by previous guy - looks more smokey) - $120 pair


- Rear Centre Panel (good condition) - $100


- Stock Air/Fuel Regulator (good condition) - $50


- Stock SMIC (good condition) - $100 pair


- SMIC Ducts (good condition) - $50 pair


- Stock Recirc Valves (good condition) - $50 pair


Shit that took ages hope it doesn't take long to load Sorry about the massive pics (still not sure how to resize)

I would prefer pickup in Brisbane as some items may be quite expensive to post (eg. hatch ) But no probs organising it for you.

If there are any questions or requests for more photos just let me know (Nice to finally have my own digital camera ).

Cheers.
Naveen.

 

series 2 ptu

will it work on a tt 5sp manual jap spec

 

Yep sure will

thats what mine is

 

Click here.. sorry heres the dial up friendly pics



















Hope thats better

 

aaaarrrrghh

My heads going to explode
Should ask the mods to edit your first post and remove the pics

 

I will take your Defi Control unit and Oil temp gauge, however you are a little off which what these are worth to buy new. Controller is only worth $105 new, and the Oil temp is $204 so I'll pay $250 for both these units plus whatever registered post is to my place in Perth.

Happy with this?

 

Where are those prices from?

I payed $900 for the 2 gauges and the control unit and the prices I'm asking are similar to what is charged in Brisbane at AMEC so not really that interested. Plus their already in Australia so you can't compare the prices to overnight parts..
These are brand new and I haven't even taken the gauge out to look at it. They have just sat in my cupboard..Its $395 for oil temp and control unit so might wait and see if I can get close to what I payed for them. If not will consider your offer.

Cheers.
Naveen.

 

No problem, it's not your fault but those prices are just not what they are worth nowadays. Plus they wouldn't have a warranty attached now either. Mine is a genuine offer for second hand goods. Good luck with you sale however.

 

They are not second hand.. They're brand new.

Where are those prices from you quoted at least so I can see for myself?

 

Greenline Motorsport dude.

 

I may be interested in the waterpump pully. What is the benefit? Less resistance../ better water flow?

Worthwhile?

 

Definitely worth the money.

http://www.aus300zx.com/forum/showthread.php?t=252283&highlight=Overdrive+Pulley

Thats the GB thread outlining the pulley. I think everything you want to know is there. But yeah you have the right idea. Because an underdrive crank pulley also underdrives the water pump pulley on a zed, this brings it back to normal I believe. As overheating is always a concern on our cars this is something that will give you peace of mind and keep your zed running the way it was meant to :zlove: :zlove:

Hope that helps.

 

Interested in Front Bar

PM sent

 

Front bar and Defi oil temp and control unit sold

pending payment.

 

Overdrive pulley sold pending payment..

Heres a pic of what the braided fuel lines look like installed.:zlove:

 

I want the fuel filter kit!

Hey man I'll Take the polished fuel filter kit w/braided lines! for 210!!

If I dropped you a $50 deposit to hold it for me will you do so?!

Cuz on the 14th of MARCH (yes very soon) i'll be coming up from Hobart to Brissy! Saves me on postage costs and I can arrange pickup or meet you!

Would you be up for that?

PM me back with details!

Cheers mate!

Ben

 

UPDATE..

So far the following items have been sold pending payment..
- UAS Front Bar.
- Smithy's Braided Fuel Line Kit w/ polished filter.
- Pex's Overdrive Water Pump Pulley.
- Defi BF series Oil Temp Gauge and Control Unit.

Parts still available:

- Series 2 PTU - $270.
- Thermal Flex Vacc./Boost Hose 6x4mm, 5x6mm & 1.5x8mm in red (enough hose in each size to replace nearly all the hoses possible - good to do with 100k etc. as hoses are old and brittle) - $80.
- Defi-Link Meter BF Series Oil Pressure Gauge (Electronic) - $310.

Plus all the used parts (refer to previous posts for details and pics)

I know this stuff shouldn't last much longer.

Cheers.
Naveen.

 

PTU

I'll offer $200 inc postage for the PTU.

Andrew

 

Nah sorry not keen..

I can return this to Caz and get all my money back. I just thought someone maybe interested before I do that. Same goes with the Vac/Boost Hose..

The stuff hasnt been opened so no not willing to accept $200 Andrew.

Cheers
Naveen.

 

UPDATE!!

So far the following items have been sold pending payment..
- UAS Front Bar.
- Smithy's Braided Fuel Line Kit w/ polished filter.
- Pex's Overdrive Water Pump Pulley.
- Defi BF series Oil Temp Gauge and Control Unit.
- Stock SMIC and SMIC Ducts

Parts still available:

- Series 2 PTU - $270.
- Thermal Flex Vacc./Boost Hose 6x4mm, 5x6mm & 1.5x8mm in red (enough hose in each size to replace nearly all the hoses possible - good to do with 100k etc. as hoses are old and brittle) - $80.
- Defi-Link Meter BF Series Oil Pressure Gauge (Electronic) - $310.

Plus all the used parts (refer to previous posts for details and pics)
- 2 x rear hatches etc..

Surely there are people wanting these parts. They're cheaper than what you can find around and the PTU, hose and Defi gauge are all brand new :zlove:

Cheers
Naveen.