I always wanted to design/make a Z clock or a watch. But I have too many things to do lately . Maybe I'll do the watches later in the near future. Just right click and save this 724x1024px picture and print your own clock face, Buy a cheap clock disassemble it print the dial on a mat or gloss paper at your desired diameter and install it. set the arms at 00:00:00 and you can install it . You could paint the arms orange,use a clock with a brushed SS or aluminum rim to resemble the gauge rings or even install a back-light to it . I moved the tachometer numbers to line up with the clock numbers. 5 with the 12 , 6 with the 1, 8 with the 3 etc you get the point some late version models have some red stripes between the 6.5K and 7K .I think DVDBURN could elaborate on this Also the 0 to 1K rpm section is different on some years.But again I don't know which year. Thanks goes to DVDBURN for providing me some scans. I would like to see some pictures if you do this project ..I think they would be a great holiday present . And you could always play with the minute dial to REV your clock .. Here you go !!