tyre wearing

Hey guys found that my rear tyre is wearing out in an odd way..I think it is brushing against the guard and cuting the tyre deep..it happened after instaling the new rims..what should i do for this..raise the car?? But I dont have adjustable suspension either..

 

your rear guard looks pretty much like it's touching the wheels. What are the specs on your tyres? Don't wanna go too big of a profile on an 18 inch

 

get the guards rolled ,

 

Cant really remember the offsets..so what can i do now..raise the car I guess..Is it very bad for the tyre..

 

Ohhh another $1000 gone..is it bad for the tyre to run like this fo a couple of months??

 

Or roll the guards as Si suggested

Edit:

$1000 , can be done a lot cheaper than that. No I wouldn't keep driving with it like that.

 

of course its bad for the tyre lol,it will slice it and you will get a blow out

you can always put new springs in,your old ones have probably sagged,new ones will raise it

 

How do I roll the guards??

 

well if it's just that tiny bit that's been taken off should be fine but still not that great. You don't have spacers or anything do you?

 

heres a $300 tyre of mine last year thats 10mins old ,although i have coilovers and had it very low,if you go over a pothole at speed,this is whats going to happen to yours

 

well in that case, don't risk it!

 

so better to raise the car then right??

Or how do you roll the guards??

 

buy a guard roller only about $350 depending on where u live there are some mobile joints that will come to you and roll .

Trev

 

Far out, use google :bash:

Clicky

 

guard rollers are $145 ,or you can get a tyre place to do it for around $40 a guard

 

is it going to help a lot..will it look funny after rolling the guards..

Can you see that the gueards are rolled??

 

guard rolling W.A spec rofl

clicky click

yes,no and no

 

I ll go to a tyre shop and ask about it and check..

 

got a linky? thats nice and cheap

 

Tom said that my rear subframe bushing are fcuked as well..could this be an issue??