Hey zedders a question for the tuning nuts we got here, Which is better? Having injectors firing in seqential setup or Firing in batches? How does this work and effect the tune when tuning on a haltech e11? Which is more power productive? or is it just a case the motor running smoother? Fire away! lol many thanks Frank
Not sure. but stock setup = simultaneous firing of all 6 when starting sequential firing once engine running. If you fired injectors on any cylinders except the one on the power stroke, it would be a waste I'd think. Just pissing fuel out the exhaust. Don't know for sure. Try search on twinturbo.net
not exactly sure on details, but sequential is the way to go. certainly won't be a complete waste if fired simultaneously, as valves will be shut until fuel is needed, but would be more efficient to shoot fuel into port closer to when its required.
Set for sequential It allows optimum injector timing. Whilst you are on that page in Halwin note that you can edit injector trims if you find 5 and 6 are running a little lean. If you haven't already done it, download the manual from the Haltech site. Also be aware that the E11 does not have as many auxiliary outputs as the OEM ECU. You will have to be creative to get everything working. Good Luck.