WA Tech day/cruise! food and drinks and jdm ;) MAY 4TH 2013

not long now

I'll bring some vac hose along as well, I have some of the blue 3mm silicon left. will also bring the Workshop manuals and all my other bits and pieces along

 

thank you

 

Ok people car we get some names so we know who we are meeting where.

Powis car park:
1 Buzz1986
2 Jinxed

Cockburn:
1

 

Powis car park:
1 Buzz1986
2 Jinxed
3 Romonski

Cockburn:
1
2
3

 

Powis car park:
1 Buzz1986
2 Jinxed
3 Romonski

Cockburn:
1 SanDy69
2
3

 

ok so since i misread the date and i thought it was a sunday. Im out, got a fusball game in the afternoon and cant make it

 

got a few questions,

1 michandy, have you got much vac hoses left or should i buy more?
2 who can grab me a plenum gasket? a few people have them on here
3 how many meters of efi hose should i get?

 

In order to properly remove a plenum, the following tools are required:
* 8mm socket, 10mm socket, 12mm socket, 12mm deep socket
* ratcheting driver for the sockets
* 8mm wrench, 10mm wrench, 14mm wrench
* 5mm allen wrench
* flex joint (universal joint)
* long needle nose pliers
* screwdriver (different sizes) for prying connectors, etc.
If you have a 10mm carburetor wrench, you can use that instead of the 8mm socket and flex joint combination.
And because the plenum gasket is made out of paper, anytime you remove the plenum, you should replace it with:
* upper plenum gasket (Nissan part number 14033-30P02)
If you decide to bypass the throttle body water hoses, you will need:
* 4 feet of 6mm fuel line or water hose
* 3 feet of 6mm vacuum line
* 2 feet of 4mm vacuum line

thats a list of some of the stuff we will need.

http://tech.aus300zx.com/

thats the article that we will be following more or less.

get the plenum gasket from one of the several places already listed, or call chris ezzupturbo.

 

Vac hose

I'll bring along about 10-15 meters of 3mm vac hose, blue silicon.
should be enough. I do have a few bits of other sizes aswell that I'll bring along

 

thank you so i only have to buy the EFI hose, right??

 

some tests to be done on the day

1-compression test
2- boost leak test
3- system diagnosis
4- what else?

i got none of these ^ tools so guys please bring yours!!

 

is there a compressor at the place you are going? you'll need one to perform 2-

 

yeah that too!

 

i was just going to do a bypass and delete some crap

 

this tech day is on this weekend zedders!

come down and have some fun, regardless of wether you need work done or not its always a good day out....

early morning cruise to location as well for those interested, details in thread.....

 

thats right guys, come along for some laughs and fun

and this is on this Saturday, the 4th of may.... May the fourth be with you......

 

well the weather is looking better, cloudy for sat at the moment

so i expect to see you all at the meet points come Saturday

Powis car park:
1 Buzz1986
2 Jinxed
3

Cockburn:
1 SanDy69
2
3