Guru's i forgot to take a picture of it so i will try to explain as best i can. During my heater core replacement i found at the back of the cluster there are 3 RED wires connected to screws on the back of the cluster. approx location behind the oil pressure gauge. As my oil pressure gauge has never worked and someone installed an aftermarket one that never worked either i think i have found the issue. the PO who installed the AM gauge had tapped into the OEM gauge wiring and left wires and crap everywhere behind the cluster. what i want to know is (hopefully by diagram or photo) where exactly those wires are meant to connect to. there was also an unused (3 or 4 i cant remember) black elec connector behind the cluster too im hoping this could be the original oil gauge connection. hope that makes sense, Thanks Rob
