I've put together a range of new and current pieces available with huge discounts Up to 37% off for aus300zx forum members only Further discounts apply for group buys 20 sets or more Can frieght any where through out australia with minimal fuss or cost. Though extra patience is appreciated Range from 16"-20" Glad to arrange other wheels not shown here, or custom wheels. To fit Z32, other sizes available, however what is listed will fit a Z32 Here is a small range of things available. ILLUSION, available in 16-19" Machine face, black windows and spoke STORM available in 16-20" Hyper black TREMORavailable in 16-20" Hyper Black 5 spoke with a machine dish LINEARStock arriving soon. Available in 17-20" Hyper black spokes with a machine dish LINEAR CHROMEAvailable in 17-20" Full Chrome anodized with dish PANTHER Available in 17,18 & 20 High load rated, machine face and dish with black window and spokes picutre courtesy of fellow forum member BRUTEAvailable in 17-19" Machine face and carbon black windows TORQUEAvailable in 17-20" in a Hyper Silver spoke finish with machine dish DEVINOAvailable in 20" Hyper silver face with machined dish Many other wheels available, pictures soon to come. Please don't hesitate to PM me or ring me for any more information! regards Rik 0433 482 745
I'll post Prices upon interest in particular wheels. just too much effort otherwise. (i have it all written down for us)
LINEARStock arriving soon. Available in 17-20" Hyper black spokes with a machine dish Hey Roi, I am interested in how much these cost, and also would like to see the whole 300 range of wheels. Cheers Reggie
Price please after price on 18' panthers with GOOD tyres and also 19' Illusion with tyres. Could you specify brand and size of tyres recommended to fit each please. thanks
What price can you get on Gram Light 57Pro 18x9+40 for front and 18x10+38 for the rear. PM if you don't want to post it up here. Also, are custom offsets available? The standard offsets are less than desireable.
fyi, some fitments not available yet due to shipping. only some though ( One thing i didn't check!!!)
I too would like to know Haha ZDUCTIV, that's an awesome cardomain submission, ain't it Fell in love with the 57pro's after seeing his ride. Love the deeep dish! If you can do any better than $3600 for the set, let me know!
Hi Rik, Of those wheels the only one that I'm inclined towards is the Tremor. Could you please PM me a price for a 17×8 and 17×9 staggered set, with offset information. I am not interested in any wheels that would require spacers. Also, I'm not sure about the hyper black colour - gold, bronze, silver or grey are more what I'm looking for. There are some wheels out there that I am v-e-e-e-r-y interested in. Can you arrange any of the following? Wedsport TC105N's Enkei RPF01's Buddy Club P1's Work Emotion CR Kai If these are only available pre-ordered from Japan, that's not a problem. I'd prefer to wait and get the lightest wheel and the best price that I like most ... there has to be a way of working that out! Tyres: Can you supply Bridgestone RE55's - and if so, can you PM me with a price for 235-45×17 in SR2 compound, amd 255-40×17 in SR compound? Thanks, Mikey.
Hey, I like the Illusion ones Can I get a price for a 17×8 and 17×9 staggered set also decent tyres as well if availale thx
Roi, I don't mean to be a pain in the ass, HOWEVER, for us to get organised enough to start expressing an interest in running a GB on some rims, we need to know the prices of all of them - because sometimes we're happy to go with our 2nd favourite rim if it is significantly cheaper than our favourite We also need to know the widths of the rims - some of us want 8.5 on the front, others want 8 or 9 - some of us want 9 on the rear, others want 9.5 It might be a lot to type out, so if you've written on paper, can't u just scan it and then post it up as an image and we can all see the hand-drawn table or list etc??? And if you don't want to do this, give me the price of the tremor in 19x8.5 for the fronts and 19x9.5 for the rears To the rest of us in here, let's get some numbers together and organise this into a GB so we get a discount ie let's get 10-20 sets of rims and buyers together to make 1 big purchase - and do group shipping to the states
yes, what size are you looking for? (these aren't loaded on my computer, so i'll find out for you on monday.) have a good weekend
I will certainly do that, give me some time though! i'll repost it with all that information. i must admit a lot of the rims i posted about don't come with an option of staggered fitments, they come out in one width. however, doesn't mean i can't make sure you get looked after with anything else you've got! regards rik