Hi guys, Just been speaking to a bearing dealer and advised that TT bearing kits are apparently hard to find. He said they have a few of these one available. Can someone confirm that this is the kit that will suit the TT and if so I'll set up a GB. [/URL] Uploaded with ImageShack.us[/IMG] Adam
There are bearings that are similar looking to the TT but have a different centre hole size. What is the manufacturer part number and hole size ? If they are the right thing and price is good, I'm in !
OK Ive asked for this information.. He said he has 5 sets on hand so I';; see what price he can whip up Adam
two bird NA rear bearing are cheap, you can get non oem. So change over to a NA rear cradle, get the 4.1 ratio in the rear change the bearings while you are there...
The 4 tapped threads are M12. The 2 smaller holes on the flange are 8mm, and the larger one is 21mm. We have it listed for the rear of the twin turbo 300ZX, and also the GT-R Skyline. We can do them for $150 incl gst.
Hi mate thanks for trying to help out, whats the bearing internal diameter where the hub goes that's the difference between apparently similar bearings. I have another thread going were others are being kind enough to submit info. http://www.aus300zx.com/forum/showthread.php?t=314822
OK, He says that he lists this part as an alternative part.. not sure why the info wasnt provided as yet. We list 43281-30P05 as an alternative. Adam Ok just done a quick check and it seems to be NA? as per fastparts anyways. Worth plugging a VIN into this? http://www.nissanpartszone.com/parts/nissan-bearing-rear-axle-inner~43281-30p05.html This seems to give us a correct part number ? http://www.nissanpartszone.com/Page...ectionNo=G&ComponentsNo=430&ComponentsIndex=2
All that info points to an NA bearing, there is conflicting information in cross references, we MUST have the ID of the bearing to know if its an NA or TT.