WA Parting out sale, heaps of stuff! (Part 1)

Discussion in 'Car Parts for Sale or Wanted' started by Miksta, Feb 24, 2010.

  1. Miksta

    Miksta M Spec

    Well the time has come to advertise on the forums all my mods which have been taken off the zed. The car is sold and below is a list of what is remaining. Would prefer WA buyers especially for the larger items but interstate buyers posting is extra to the below prices....

    Starcorp racing rims, 18 x 8.5 fronts and deep dish 18 x 9.5 rear, about 90% tread left - $1800

    [​IMG]

    [​IMG]

    Tien superstreet coilovers - $1500

    [​IMG]

    FMIC (From the GB JamesZ007, includes piping) - $350

    [​IMG]

    Caz's SS hardpipes - v good condition - $350

    [​IMG]

    Cluster with Tomei 320km/hr speedo (calibrated), speed rings and orange background lights - $250

    [​IMG]

    TT Plenum (minus red piping) with throttle bodies - $100

    [​IMG]

    UAS vented bonnet Fibreglass (have drilled holes for bonnet pins but comes without bonnet pins) - $550

    [​IMG]


    Intercooler piping and extra's- $50

    [​IMG]

    Strut brace - $100, targa shade - $50 (both v good condition)

    [​IMG]

    NA PS pump - $100, alternator - $50, underdrive pulley (not gfb) - $100, practically new afm only recently replaced - $250, Water pump (only recently new due to 100k service) - $50, Auto tensioner - $50, toshiba battery packet with no batteries - $1000 bux (Bargain!!)

    [​IMG]

    Starter motor (good and working cond) - $50, standard water pipes - $50, a/c pump - $100, ps resiviour - $50

    [​IMG]

    Doors with speaker pods - $100

    [​IMG]

    Short shifter with Momo ball gear knob (avg cond - top peeling off) - $100

    [​IMG]

    PZP Dump pipes (not shown in picture), test piipes and cat back exhaust - the lot - $400

    [​IMG]

    Rear seats (leather) - $100, drivers side seat (photo not taken, wear in usual spot, leather/electric) - $100, passengers side seat (photo not taken, rip in middle of seat otherwise no wear) - $100

    [​IMG]

    Fan shroud - $20

    [​IMG]

    I think this'll do for Part 1 of the garage sale, there will be a part 2 in the future....
     
  2. heavytrevy

    heavytrevy "Hammer time "

    speedo

    dibs on the speedo ;)

    Can the speedo be easily reversed back to the original colour instead of the orange lights?

    Trev
     
  3. Kabir

    Kabir Well-Known Member

    Strut brace - $100, is it from UAS? interested.
     
  4. Fate

    Fate Evil Genius

    Pm Sent Re: Starter Motor
     
  5. Sanouske

    Sanouske Retired Moderator

    EOI for the A/C Pump, pending further info

    What year model was the pump removed from?
    Still working strong upon removal?

    Thanks!
     
  6. Miksta

    Miksta M Spec

    Yes, you can take out the bulbs from behind the cluster and replace with whatever colour you wish :)

     
  7. Miksta

    Miksta M Spec

    I dont believe its from UAS but is was such a long time ago when I bought it, i think the UAS one has "bends" in it, well the new one anyways. Maybe someone else can confirm?

     
  8. Miksta

    Miksta M Spec

    Pm replied to

     
  9. Miksta

    Miksta M Spec

    Model is from a 89 and yes it was working prior to removing it from the motor, that wasn't the problem part...

     
  10. pennyarvs

    pennyarvs New Member

    Interested on strut brace and targa shades. Cn u kindly send me a photo as i cant see it from my iphone?
     
  11. awgazm

    awgazm Active Member

    interested in the bonnet... asuming no cracks and paints all good yeah??
     
  12. Adamness

    Adamness Active Member

    Interested in Caz SS piping, will need a week or 2 to get the cash together though cause i just bought brakes!

    Also, Do you ever get any problems with water going through the vents in those style bonnets? Rain can get pretty heavy up here in north qld so I've been hesitant to get one.
     
    Last edited: Feb 24, 2010
  13. Miksta

    Miksta M Spec

    Pm me how you would like me to send the pics if you can't view it on this site!

     
  14. Miksta

    Miksta M Spec

    Can confirm that the bonnet is in v good condition (no cracks), the bonnet has been sprayed since it came over from UAS syd as it was clear

     
  15. Miksta

    Miksta M Spec

    Firstly shipping a bonnet that size would be impractical imo, to be honest, I had the bonnet for many years and when water entered the vents it caused no problems. What will cause problems is your nosepanel and if it can prevent water from entering the AFM from the interface between the bonnet and nose panel, you would need to check that out..

     
  16. Adamness

    Adamness Active Member

    Yeah, I wasn't wanting to buy your bonnet as I know postage would kill me! just curious with the styling of it and water issues.

    I'm keen for the SS pipes but need to get some cash together

     
  17. Sanouske

    Sanouske Retired Moderator

    pm sent. thanks
     
  18. Kabir

    Kabir Well-Known Member

    Can someone shade some light on stuart bar? What brand it is and if it will fit in a TT without any modification?
     
  19. laam

    laam Member

    Any idea how much it would cost to get the leather rear seats sent to vic?
     
  20. loud'n'proud

    loud'n'proud Challenge Accepted

    Yes


    and


    too much
     

Share This Page