Oil block adapters

Discussion in 'Technical' started by Mr J-zed, May 31, 2015.

  1. Mr J-zed

    Mr J-zed Member

    Hey guys just want to know what people can recommend for sandwich adapters. I am intending to run oil temp, pressure for track purpose. Thanks.
     
    Mr J-zed, May 31, 2015
    #1
  2. rob260

    rob260 Administrator Staff Member

    I can supply one for $38.90 delivered.

    Specs as follows

    - Accepts 2x 1/8" NPT fittings for Oil Temperature & Oil pressure
    - Includes 1/8" NPT blockoffs for unused ports
    - Vehicle Manufacturer Compatibility:
    Nissan
    Toyota
    Mitsubishi
    Subaru
    Mazda
    Honda
    Ford

    I have used these on a couple of installs; they don't hang too low (the filter still sits much higher than the sump) and they don't leak.
     

    Attached Files:

    rob260, May 31, 2015
    #2
  3. Mr J-zed

    Mr J-zed Member

    Appreciate Rob, I was going to use auto meter senders, should be alright to suit this. So $39 posted?
     
    Mr J-zed, May 31, 2015
    #3
  4. rob260

    rob260 Administrator Staff Member

    Yes and double check the threads on the senders but from memory they should fit. Let me know if you want a price on gauges too :)
     
    rob260, May 31, 2015
    #4
  5. Mr J-zed

    Mr J-zed Member

    Alright cool. What sort of gauge do you have? Do you have the sender as well?
     
    Mr J-zed, May 31, 2015
    #5
  6. rob260

    rob260 Administrator Staff Member

    I carry auto meter gauges, holders, senders, you name it. Might take this to PM though :)
     
    rob260, May 31, 2015
    #6
  7. ZX_DORIFT

    ZX_DORIFT ENGINEER

    734-08-BLK

    Block (M18x1.5) to Oil Filter (3/4x16)

    [​IMG]
     
    ZX_DORIFT, Jun 2, 2015
    #7

Share This Page