need info on HID KITS.

Discussion in 'Non Technical' started by nighttrain, Feb 26, 2011.

  1. nighttrain

    nighttrain New Member

    hi guys im looking for an HID kit to fit my 91 z32 does anyone know of a kit that will fit my car im hitting brick walls. contact number is 0413205019.
    cheers mark
     
  2. ichizora

    ichizora Loud

    Get a H3 kit from eBay, 35W 4300K for your low beams for an effective setup
     
  3. tassuperkart

    tassuperkart Its a lie I tell you!

    Jaycar also sell HID kits at close to unbeateable prices.
    L8r
    E
     
  4. pexzed

    pexzed Forum Administrator

    Pm sent
     
  5. Carter

    Carter New Member

    for the high beam or low beam??.
    for the lows any H3 kit should fit fairly easy. fairly straight forward.
    the high beams not real sure but i think they need a bit of modification to fit - im not sure what, ive only done the lows.
     
  6. Chrispy

    Chrispy Pretentious Upstart

    High beams are H1, and a bit of mucking about to do.
     
  7. DinoZ

    DinoZ Talks sh#t for a living.

    [​IMG]

    Many thanks to Patrick who turned up this stepdown collar for me out of UHMW.

    I separated the retaining spring from the stock globe mount holder to hold the collar in place. Also put a hacksaw cut through the collar to make it easy and slip over the wiring. My HID was tight in the base and I did need to use the dremel to give the globe a bit more clearance.

    I did all this while the headlight was out of the car for cleaning, so that did make life a lot easier.
     

Share This Page