What parts besides pump, reservoir and brackets are required to remove the hicas system from Z and put an NA kit on. I have it all here but not 100% sure what needs to be in the kit before I advertise it. Cheers John
cresta you old dog u should know !!! you sold me na gear before pump pump mounting bracket(to block) adjustment plate plate bolt bolts for the mounting bracket and the ps pump are different aswell no high pressure lines need 2 be changed TT ones work fine. oh and a NA res or block of one of the holes on the TT one and of course a 3 rib belt
1. na p/s pump (49110-40P00) 2. mounting bracket(2 pieces)(11940-30P00 & 11941-30P00) 3. bolts to mount bracket (8mmx1.25, 3-50mm, 1-60mm) 4. long bolt to attach pump to bracket (48361-40P00) 5. na p/s pump pulley (49586-55S00) 6. new p/s belt (11950-F6501) 7. new n/a p/s fluid resevoir (49180-30P01) 8. cap (49181-W1702) 9. filter (49182-50L05) 8. new hoses to attach pump to resevoir(2)(49717-40P00 & 49725-30P03) You can also remove the HICAS control box located to the right of the ECU. I still use the TT resovior cap though, this will light the HICAS idiot light on the dash to tell me if the fluid level is low. This works w/o the HICAS control box installed. If you leave the control unit installed, the indicator may light up all the time since you removed the steering cylinder and safety valve. Not sure is this is true because I removed everything at once. /john yim