MAGNAFLOW MUFFLERS GB

What would 14807's be like on a NA that already has quite a deep note? Too loud.

 

Nah mate, these wont be too loud. Though how do you actually define "too loud?". Also it will depend on what else you have done to your exhaust system.

Regards.... Dave

 

Any one know what cats would be the best for a simple swap with the stock ones off a TT 2+2? also will custom piping be needed to fit these cats, X pipe and new mufflers all together?
Cheers

 

any updates?

 

Hi Drift Spec, do you know if Magnaflow make a 3.5 inch inlet muffler, as far as I can see I don't think they do, I'm thinking about going a single exit catback. Or, do you think a 3 inch inlet race series muffler from Magnaflow would be adequate? I want good low/mid range torque, and I'm only running auto turbo's @ a max of 15/16 PSI, would twin 2.5 inch dumps, front pipes, cat's, to 2.5 inch inlet's to 3 inch outlet Y-Pipe to 3 inch inlet muffler provide enough flow? If so, I might scramble some coin together and get a Magnaflow race muffler.

 

Magnaflow Muffler GB List

Here is the list of EOI I have received so far. Looks like we have the numbers we need to place the order. Will PM payment details out to you all shortly.
If you know of any one thinking of making the most of these special prices, tell em to jump on in quick.

1. xam300 === 2X #14807 + 1X #11385 + 2X 53005 = $139
2. mr zed x === 2X #14862
3. WhiteNight === 2X #14828
4. Kiz === 1x #11385
5. Whoppersandwich === 2 x #14807 mufflers+ 2 x #59955
6. Sanouske === 1x #11385 + 2 x #59955
7. 90TTZ === 2X #12226 + 2X #35158
8. Big_al_TT92ZX === 1x 14819 + 1x 10778


Regards.... Dave

Drift Spec Racing

 

hope the payment isnt needed to quick dave.

have heaps of shit coming up in the next 3 weeks.
anytime after that im sweet. really dont want to pull out of this!!

 

Sooner the better for me... but whatever works

 

Same here - if you want to close this GB any earlier be my guest Drift Spec, no rush if you dont wanna tho.

 

Finalising GB List

Here is the list of EOI I have received so far. Looks like we have the numbers we need to place the order. Will PM payment details out to you all shortly.
If you know of any one thinking of making the most of these special prices, tell em to jump on in quick. Also please modify the list guys if any of the Part # are incorrect. Please email me at driftspec.racing@gmail.com so I can send you an invoice if you would like.

1. xam300 === 2X #14807 + 1X #11385 + 2X 53005
2. mr zed x === 2X #14862
3. WhiteNight === 2X #14828
4. Kiz === 1x #11385
5. Whoppersandwich === 2 x #14807 mufflers+ 2 x #59955
6. Sanouske === 1x #11385 + 2 x #59955
7. 90TTZ === 2X #12225 + 2X #35158
8. Big_al_TT92ZX === 1x 14819 + 1x 10778


Regards.... Dave

Drift Spec Racing

 

How much total for a 12599

Cheers

James

 

For the 12599 your looking at $129 + shipping. Will get back to you with a shipping quote tomorrow.

Regards... Dave

 

Still only EOI pending the further info needed via our PMs. Just amending the parts im interested in. Thanks.

1. xam300 === 2X #14807 + 1X #11385 + 2X 53005
2. mr zed x === 2X #14862
3. WhiteNight === 2X #14828
4. Kiz === 1x #11385
5. Whoppersandwich === 2 x #14807 mufflers+ 2 x #59955
6. Sanouske === 1x #11385(X muff) + 2 x #14807(muff) + 2 x #59955(cat)
7. 90TTZ === 2X #12225 + 2X #35158
8. Big_al_TT92ZX === 1x 14819 + 1x 10778

 

1. xam300 === 2X #14807 + 1X #11385 + 2X 53005
2. mr zed x === 2X #14862
3. WhiteNight === 2X #14828
4. Kiz === 1x #11385
5. Whoppersandwich === 2 x #14807 mufflers+ 2 x #59955
6. Sanouske === 1x #11385(X muff) + 2 x #14807(muff) + 2 x #59955(cat)
7. 90TTZ === 2X #12225 + 2X #35158
8. Big_al_TT92ZX === 1x 14819 + 1x 10778
9. beaver 2x14807 2x59929cats

 

EOI pending gb closing date.


1. xam300 === 2X #14807 + 1X #11385 + 2X 53005
2. mr zed x === 2X #14862
3. WhiteNight === 2X #14828
4. Kiz === 1x #11385
5. Whoppersandwich === 2 x #14807 mufflers+ 2 x #59955
6. Sanouske === 1x #11385(X muff) + 2 x #14807(muff) + 2 x #59955(cat)
7. 90TTZ === 2X #12225 + 2X #35158
8. Big_al_TT92ZX === 1x 14819 + 1x 10778
9. beaver 2x14807 2x59929cats
10. Disasterpiece === 2x #14807 + 1x #11385

 

lol the longer the better for me

 

Me too, I can easily make it before the original cut off date which is what I was hoping for. If it ends early I'm in trouble.

 

14827 do you have a bigger picture? or a link to see more details on them
im keen on one style like this.

 

http://www.magnaflow.com/02product/displayapplications.asp?partnumber=14827

"Additional Information

Material: 100% Stainless Steel - Mirror Finish
Body Shape: 5in.x8in. Oval
Inlet/Outlet Size: 2.25in./4in.
Body Length: 14in.
Overall Length: 23.25in.
Core Size: 2.5in.
Position: Center/Center"



Goto the website and put in the code for all the details.

 

Hey Guys! Dont worry to much, We'll look after you. For those who get payment in shortly, they will get there part's sooner. But for those who cant make payment until later in the month, but by the 31st Oct, you will still get the special discounts. Though items will not be shipped until full payment is received.
Having said that I can only start shipping the parts as soon as I have payments for the minimum of 20 units. So once we have our payments in for at least 20, you all still have till the end of the month to place an order.
If there is any confusion, let me know. Im here to help as much as I can
Regards...Dave