Low PSI... any help

Discussion in 'Technical' started by Andy300, Dec 18, 2007.

  1. Andy300

    Andy300 Was Na Now TT

    Messages:
    139
    Likes Received:
    0
    Trophy Points:
    0
    Well i knew my car has been seemingly slower as of late.. and since the aus300 + tuned cruise i have also noticed that the sound of my boost, was alot louder. and well after some looking on the net, i found a 'bar to psi' conversion site. and after a quick test drive i found that the max boost im getting is only 7.39psi. which is 0.51bar.. now to me that seems like a big leek, a while ago, i did take my car to 'Tom' (PZP) and he told me i had a 1 or 2 lill leaks, that where near the turbos? and that ment id need a plenum pull to get to them, but he also said that there, only small, so im probably only a little under stock.. but yer, it would appear that its worse then that now....

    well after making you read all that, heres my actual question :rolleyes: does can any1 or will any1 recommend a good mechanic who can deal with this sort of stuff, in the Mandurah/Baldivis/Rockingham area... i know Tom (PZP) is 1 of the best to deal, with, but hes WAY to far away.... any help would be great :bash: :zlove: :zlove: :zlove:
     
  2. Jinxed

    Jinxed Moderator

    Messages:
    8,220
    Likes Received:
    35
    Trophy Points:
    48
    could also be safety boost

    thats around 7psi when your in safety mode.......
    your car sounded very odd at the cruise, not at all like it sounded when buzz owned it........???
     
    Last edited: Dec 18, 2007
  3. Andy300

    Andy300 Was Na Now TT

    Messages:
    139
    Likes Received:
    0
    Trophy Points:
    0
    WOW im a complete idiot...... 0.51... wtf more like 0.6 and thats like 8.7psi... hahaha seems its all ok, BAH!!!! either way a mechanic that deals with imports in the this area would still be good to know thanks :bash: :bash: :bash: :bash: :bash: :bash: :bash: :bash: :bash: :bash: :bash: :bash: :bash: :bash:
     
  4. Andy300

    Andy300 Was Na Now TT

    Messages:
    139
    Likes Received:
    0
    Trophy Points:
    0
    yer agree, hopeing thats the lill leaks tom told me about, so thats why i wana bite the bullet and get its a full going over and service and fix that leak.

    im 99% sure, with the sound its mainly because of the o2 sensors, because 1 is dead the other is almost dead, still need to get them replaced with my new 1's... (hence the need for an import mechanic) so im burning VERY rich, which is makeing the car, sound off i hope that the reason anyway.
     
    Last edited: Dec 18, 2007
  5. ryanlok15

    ryanlok15 red zedder

    Messages:
    618
    Likes Received:
    1
    Trophy Points:
    18
    sorry to hijack,
    but im funning 0.4bar and my car isn't detonating but its the wire to the detonation sensor:confused: ...but see i still get 560km to the tank? which is wierd but im still running on .4bar:(...i dont know where the fault is and i dont know how to check it...what are my options so i can recitify this asap...cheers

    ryan
     
  6. WhiteNight

    WhiteNight Littering and...

    Messages:
    2,532
    Likes Received:
    19
    Trophy Points:
    38
    Mandurah Mechanics

    I have 2nd hand information that this place is ok. Only one I know of down your way. This was recommended to me by the previous owner of my car who did a few jobs on the car before I purchased it. PZP does it all now.



    Sik Em Wrex Racing
    Flag no.1
    47 Gordon Rd Mandurah WA 6210
    ph: (08) 9581 8577
     
  7. Andy300

    Andy300 Was Na Now TT

    Messages:
    139
    Likes Received:
    0
    Trophy Points:
    0
    thanks ill give em a ring 2morro
     
  8. NickTT

    NickTT L E X U S

    Messages:
    466
    Likes Received:
    1
    Trophy Points:
    16
    my car was running really rich with 2 bung o2's but didnt really sound different
     

Share This Page