kzed 12psi ecu chip

Discussion in 'Technical' started by Mr.Zed, Sep 30, 2013.

  1. Mr.Zed

    Mr.Zed New Member

    hey i brought my 92 tt manual zed 6 years ago now the previous owner said had a chip done to the ecu but was unsure on the details so today i finally got around and had a look inside my ecu to see if i could find any evidence of a chip so i found my chip and a sticker on top of it says KZED 12PSI does any body no any details about the chip also on top of my ecu has sticker blazt ecu iam guessing thats just data scanning any details would be nice cheers
     
  2. black baz

    black baz black 'n blue Bazemy

    Presumably done by Moderator. K-ZED ... suggest you PM him.
     
  3. Mr.Zed

    Mr.Zed New Member

    contacted k-zed via pm but here says to long ago he did them and cant remember on the specs and body got any info?
     
  4. MagicMike

    MagicMike Moderator Staff Member

    At a guess, there would be slight fuel trim at high rpm and speed cut removed.

    Possibly small timing increases in places.

    I'm pretty sure I remember seeing a copy, but I don't have a copy to check atm.
     
  5. black baz

    black baz black 'n blue Bazemy

    Clearly, age does weary them ......
     
  6. kakaboy

    kakaboy New Member

    I think this is what Eric put in my ECU
     
  7. Mr.Zed

    Mr.Zed New Member

    Do you have any info on it mate
     
  8. kakaboy

    kakaboy New Member

    None, you would have to get in contact with Eric from A2zed.
     
  9. Sanouske

    Sanouske Retired Moderator

    If hes still happy dealing with Aus300 members, however.
     
  10. frysie

    frysie FRYTECH

    it will be a safe map for running 12 psi on stock injectors and turbos etc.... knowing k-zed and his meticulous ingenuity (TWD's). I do believe that was what it was for....
     
  11. K-zed

    K-zed Secret Squirrel

    And using 95RON. Was dyno-tested but later replaced with a 14psi tune.
     

Share This Page