Just fitted an APEXi pod filter

Discussion in 'Technical' started by Beano, Jul 26, 2004.

  1. Beano

    Beano Member

    For anyone thats interested, I have just fitted an Apexi pod, hoping that I would get a noticable power difference, and maybe a bit of underbonnet growl.Well I got neither, not any noticable difference anyway using my seatofthepantsometer. Hoping to get it dynoed in the next few weeks and will hook the airbox back up as a comparison. I understand that a better filter will make more of a difference when the engine's hp is higher than standard, which mine is a little bit, I have a twin 2.5" catback, and 11psi boost.Out of interest, I can now hear the stock recirculation valves doing their thing. Sounds a bit like a farm animal, or maybe an owl. Never could hear it before.Ben
     
  2. WYKKED

    WYKKED <b><font color=red>2 Much Trouble</font></b>

    What you can now hear.....>>

    Is commonly referred to as the "goose honk" noise.
     
  3. PLAYRZ

    PLAYRZ New Member

    While on the topic of APEXi pods >>>

    Does anybody know the correct way to clean this type of pod filter? Being a dry element type, you can't wash it and re-oil it. I have never seen a replacement element for it either. Anyone with an APEXi Pod cleaning tip?
     
  4. Luig

    Luig luig

    Dry element filters can usually be

    tapped on the ground to get the bulk dirt out and then gentle reversed flow cleaned with compressed air then washed in warm soapy (clothes detergent) water and then rinsed in clean water and put out in the sun to dry.:D Hows that?;) &nbsp;
    regards John:cool:
     
  5. PLAYRZ

    PLAYRZ New Member

    Sounds like a plan.

    Maybe I'll just throw it in the wash with the rest of the laundry. :YD
     
  6. Luig

    Luig luig

    Dont forget the fabric softener! (n/m)

    N/M
     
  7. JZX

    JZX Member

    Replacement filters available

    APEXi just offer the entire filter as a replacement. In the case of the Zed thought it is a simple replacement of the entire unit which is why often people by the "replacement filter" instead of the kit for the zed.J.
     
  8. Beano

    Beano Member

    Yes, you are supposed to buy

    a replacement filter, which is the whole pod, although the pod by itself is a bit cheaper than the full kit for a Z32, which includes mounting brackets, nuts and bolts, and gasket. Kit was pretty cheap, about $160. Nice filter. Didn't get any stickers though.I think I remember reading about using compressed air to blow out, thats what I will be doing anyway when I next pull it off.Do foam filters tend to give more of an induction roar that cotton type? As I have put finer filter pods on a few cars and always got an induction roar, which I liked.All I get with the Apexi on the Zed is a slight sucking sound.Ben:cool:
     
  9. 2TurbosTwiceFun

    2TurbosTwiceFun Temporary Aussie

    You want sucking sound?!

    I got a K&N Pod Filter and... hell yeah... it sounds like it's SUCKING like crazy:D
    I luv my pod=)!Cheers
    Grant:-Z
     
  10. Rathius

    Rathius New Member

    I bought an apexi..

    purely because a demo I saw where they tested a few different pod filters for how much they actually *filter* - Some of th ebeter brands wer surprisingly crap at actually stopping dirt etc going through, and the apexi dynoed at a whopping 0.5hp less gain than the HKS pod which was twice the price.I'll see if I can find the site again and post it.
     
  11. Blade83

    Blade83 New Member

    Good Choice... See Inside filter test

    Click HereMost people have seen this one
     
  12. PLAYRZ

    PLAYRZ New Member

    Very interesting test results. (n/m)

    N/M
     
  13. method

    method Active Member

    O2 rush is the only way to go! Best inductio

    n and best performance :D:YD :YD
     

Share This Page