I'm new around here ~

Discussion in 'Non Technical' started by tenchi, Oct 28, 2008.

  1. tenchi

    tenchi CraZy aZn bloke

    Messages:
    57
    Likes Received:
    0
    Trophy Points:
    0
    Hi All,

    I'm a long time lurker to these forums, but have never actually posted anything, and since I actually bought a Zed, I figure I should introduce myself before I randomly started posting :)

    The Zed I bought actually belonged to forum member the_cypha, and he has been most helpful with the whole process, I don't think I could be a worse customer :(

    I'm currently in the process of working through the QLD -> NSW registration process, and boy is it fun :mad:. I didn't know the_cypha's Zed had a pod filter installed in it, and I'm wondering if that will give me problems with the blue slip process *Worried*

    A little bit about myself, I'm a bit of a motor head but a complete noob when it comes with 300s (please be gentle with me :(). Currently my daily drive is a Peugeot 206 GTi (yes, front wheels) and a Peugeot 205 SI before that.

    Living in NSW... and I guess thats most of it for now.

    Look forward to talking to you guys about... stuff :D
     
  2. kbro3

    kbro3 Baby oil technician.

    Messages:
    1,703
    Likes Received:
    3
    Trophy Points:
    38
    Welcome to the forum mate!

    Congrats on your purchase. Having a pod filter may pose an issue, so you could hit up the NSW boys for the stock airbox, shouldn't be hard to find or expensive, since almost everyone runs some type of pod on their zeds.

    Hope you sort the transfer / rego issue quickly so you can get out of your little French car and start cruising in the zed! :p:D

    -Kirill
     
  3. aazn

    aazn New Member

    Messages:
    1,981
    Likes Received:
    6
    Trophy Points:
    0
    welcome..

    with the pod filter dont worry.. i got one too.. dont think it will matter because they cant see it.. have to pull off the nose panel to see it on mine dont know about urz...

    also the tech section on this forum is great.. i have no mechanical history and im currently doing a plenum pull by following the instructions...

    good luck with the car...
     
  4. ZXDEVIL

    ZXDEVIL Active Member

    Messages:
    1,418
    Likes Received:
    18
    Trophy Points:
    38
    Welcome... not sure how harsh they will be on the filter ive never had to transfer rego, if you are worried i'm sure someones got a stock one you can whack on for the moment;)
     
  5. tenchi

    tenchi CraZy aZn bloke

    Messages:
    57
    Likes Received:
    0
    Trophy Points:
    0
    Thanks for the welcome guys =) have to admit I was a little scared to introduce myself to a group of motor heads

    *points to myself, the self confessed noob* :(

    hahaha there's nothing wrong with the Pug, although after driving the 300zx it does seem lacking somewhat =__=. I might have to wait a little bit longer for that cruise though, an engine strip and rebuild may be in the works... just because I want to pull a VG30 apart :D

    Funny you should say that. Me and my mate were at supercheap and said "bugger it lets give the 300 a service". So we bought filters and sparks, thinking everything was stock. I get home and start changing things... I open the nose up and there it is, a pod staring me in the face. My mate and I were surprised because we were expecting the stock pannels lol

    So now I have two spare stock 300zx air filters hah

    I guess I can take it to attempt blue slip, worse case they say no and ask someone to borrow a stock air box =)
     
  6. Stef

    Stef Active Member

    Messages:
    2,437
    Likes Received:
    15
    Trophy Points:
    38
    The problem is that if the car came in under the 15 year rule, it would have been complied in QLD. That compliance is no good for NSW. I believe they will let you transfer provided it has been registered in QLD for a few years.

    In my case, I bought a car from QLD that had never been registered in Australia at all, so I had to get it recomplied in NSW. That included an engineers report and emissions and noise tests. Car then had to be close to 100% stock, pod filter the least of the problem. Engineer fine combs the car, checks markings on brake hoses, lights, windows, checks speed of wipers, indicators, measures track width, seat belts, side intrusion bars etc.

    Hopefully you don't have to go through that.
     
  7. aazn

    aazn New Member

    Messages:
    1,981
    Likes Received:
    6
    Trophy Points:
    0
    if u havent opened the air filter bring it back to them and get something else.. no point having it sitting at home.....

    get heaps of degreaser and clean out that engine bay!!!
     
  8. aazn

    aazn New Member

    Messages:
    1,981
    Likes Received:
    6
    Trophy Points:
    0
    are u kidding me? speed?
     
  9. kbro3

    kbro3 Baby oil technician.

    Messages:
    1,703
    Likes Received:
    3
    Trophy Points:
    38
    lol, that's awesome! I always thought my wipers were a little fast. Used to tell my non-zed friends "See, it's a true sports car, even the wipers are quick!" :p

    -Kirill
     
  10. ed300zx

    ed300zx Active Member

    Messages:
    3,661
    Likes Received:
    5
    Trophy Points:
    38
    :thumbup: welcome mate
     
  11. hukie90

    hukie90 300TTorrr?

    Messages:
    697
    Likes Received:
    2
    Trophy Points:
    0
    welcome mate, i loved the way his zed looked :) hope ur happy with it, very nice colour and spoiler :) GL!
     
  12. TQE-756

    TQE-756 Active Member

    Messages:
    1,175
    Likes Received:
    2
    Trophy Points:
    38
    Welcome to zeddom..

    ..nice to have you aboard.
     
  13. loud'n'proud

    loud'n'proud Challenge Accepted

    Messages:
    3,662
    Likes Received:
    29
    Trophy Points:
    48
    go !!! run!! this forum sucks you in and it will never let you out!

    GET OUT WHILST YOU STILL CAN!
     
  14. tenchi

    tenchi CraZy aZn bloke

    Messages:
    57
    Likes Received:
    0
    Trophy Points:
    0
    Thanks again all =)

    I'm wondering if I should appear at the up comming NSW Tech day to meet and greet some people, and get a handle of that more fun is in store for me :p

    Yeah i'm pretty happy, the interior is something special, but there are a few odds and ends that I would like to sort out. I'm pretty sure the original owner will see it again once i'm done, have to make sure he knows he gave it a good home :p

    hahaha its been a while since I've been involved with forums, but i've been looking for a good.. um... "relaxation" activity while at work, and consumerist.com angries up the blood too much ^^
     
  15. Red_Turtle_Z

    Red_Turtle_Z 'Nuf said....

    Messages:
    326
    Likes Received:
    2
    Trophy Points:
    0
    As we all say.... Welcome to the group, make yourself at home and known to everyone. I think it would be a great opportunity for you to go to the tech day if you can make it..... and dont worry - theres no initiation thing you gotta pass - the zed will be enuf... lol :p
     
  16. CHILI

    CHILI Indestructable Target

    Messages:
    9,395
    Likes Received:
    93
    Trophy Points:
    48
    Location:
    Sydney, Australia
    Welcome on board mate, and yes, you should definitely turn up at the Tech Day(or any other event that you can get to).:zlove::zlove:

    Lloyd:zlove:



     
  17. rollin

    rollin First 9

    Messages:
    5,366
    Likes Received:
    36
    Trophy Points:
    48
    [​IMG]


    Only joking.

    Welcome :D
     
  18. Booboo

    Booboo behind enemy lines

    Messages:
    0
    Likes Received:
    0
    Trophy Points:
    0
    keep us posted ont the rego thing may come in handy for a future purchase
     
  19. j0no

    j0no Accepting Donations.

    Messages:
    126
    Likes Received:
    0
    Trophy Points:
    0
    lol @ rollin

    Welcome aboard mate. Yea its this forums can be a good place to find a laugh, or information that u need :) Good luck with your rego !
     

Share This Page