Idle Question

Discussion in 'Technical' started by ElkyJnr, May 2, 2010.

  1. ElkyJnr

    ElkyJnr New Member

    To anyone who is mechanically minded..
    just had all my turbo hoses, radiator hoses and turbo hoses changed on my zed, and been driving the car around for the past 5 days however all of a sudden shes running rough, mainly when idling...sits at around 800rpm...driving at 60 she seems fine doesnt make too much noice...
    anyone got any ideas? or even if its a wise idea to be driving the car around atm until i can get it looked at later this week...
     
  2. p5yk3r

    p5yk3r el8 haqur

    check all the plugs for corrosion, clean and retension by bending in the tabs on the connector so they make good contact.
     
  3. zed4life (zedcare.com)

    zed4life (zedcare.com) Ω vicarious zedder Ω

    I'll bet an injector connector or coilpack

    connector is loose ... firmly push down all injector connectors and coilpack connectors (particularly the rear two cylinders). Unlikely to be anything too serious.


     
  4. ElkyJnr

    ElkyJnr New Member

    this may sound a lil dumb but doesnt that require me to remove the plenum to get to these? is the car ok to run tho atm??
     
  5. hpcoolahan

    hpcoolahan back to boost ...yay

    Nope , you can get to them without having to remove plenum again.

    Cheers
    Patrick
     

Share This Page