HUGE cleanout sale tomei tune ECU 17,16"rims etc, and FREEBIES

Discussion in 'Car Parts for Sale or Wanted' started by static existence, Oct 23, 2005.

  1. static existence

    static existence New Member

    I need to clear out the garage because the zed is GONE.

    So heres what i have left.


    [​IMG]

    [​IMG]

    stock rear tailights perfect condition - $100

    [​IMG]

    [​IMG]

    Tomei tune ECU. was tested in a stock zed and did not run longer then 20sec. This was used in a 555injector setup orginally. it was also opened and tested for dry joints etc. and everything was fine. this got my old zed 275rwkw. you are quite welcome to come and test it out for yourself.

    $200


    [​IMG]

    [​IMG]

    [​IMG]

    Set of 4 17"x10 rear, 17"9 front rims. nice dish on the rears. bad gutter rash but definately fixable. the 2 fronts have brand new Nankang NS-2 235x45 done less then 300k's. as you can see the chalk is still in the tread. tyres cost me $140ea.
    they come with centre caps 2 rears have no tyres.

    $450

    [​IMG]

    [​IMG]

    Set of 4 stock zed rims painted black.
    one tyre is just road worthy.the others are fine as you can see.

    $100

    [​IMG]

    [​IMG]

    Custom vented bonnet i measured and cut up myself.
    Il throw in the scoops which i was planning on putting on which would obviosuly look alot better when it was finished.

    $100


    [​IMG]

    this stuff is the good mesh. the holes are alot smaller which looks much better IMO 1.2m x .2m, brand new i never got around to using it. i paid $32 so $15 please.


    [​IMG]

    i dont know if its any good, it came with the car you can have it for free

    [​IMG]

    [​IMG]

    same again i dont know if it works - free

    Thats about it guys.
    Matt.
     
  2. Paul187

    Paul187 cherry red

    PM'ed rims + ecu
     
  3. Doom

    Doom New Member

    PM'ed re tailights
     
  4. static existence

    static existence New Member

    both replied :D
     
  5. wa_zx

    wa_zx New Member

    17s gone?

    sold em yet?
     
  6. static existence

    static existence New Member

    all still for sale ;)
     
  7. chewy

    chewy Active Member

    I'll take the 17" rims. PM sent.
     
  8. mikemd

    mikemd New Member

    Parts sale...

    I'll take the Tomei ECU. PM sent.;)
     
  9. mikemd

    mikemd New Member

    Parts sale...

    I'll take the Tomei ECU. PM sent.;)
     
  10. Tektrader

    Tektrader Z32 Hoe, service me baby

    If you can roll the mesh up so it wont get screwed up and post it Matt I will have it.

    $20 all up inc post ?? OK

    Oh can I have the free caliper as well please?? I will pay the extra postage?

    Let me know how much it all weighs

    PM me :thumbsup:
     
  11. static existence

    static existence New Member

    yep i can roll it up no prob. PM me with your details.. ;)
     
  12. Doom

    Doom New Member

    Payment sent

    Thanks Matt
     
  13. static existence

    static existence New Member

    UPDATE - 24/10

    Tailights are SOLD
    MESH and brake caliper are SOLD

    And to all those who are interested in the 17" rims
    sorry i cant reply to all 10 of you.

    THE 17"RIMS ARE SOLD PENDING PAYMENT. I WILL UPDATE THE THREAD AS SOON AS I GET PAYMENT

    I forgot to add, the bonnet comes with hinges.


    Matt.;)
     
  14. static existence

    static existence New Member

    oh jeez, i just relised i stuffed up the measurements

    the 17" rims are just over 9.5" wide edge to edge.
    And 230mm or just over 9" from the inside lip to the other.

    So the rears are 9" wide
    and the fronts are more like 8"

    So These are back up for sale :thumbsup:

    PM me if you are still interested

    Sorry. it was a long day :wacko:


    Matt. :angry:
     
  15. wa_zx

    wa_zx New Member

    still interested in the 17s

    need a price on postage 2 wa tho...perth
     
  16. henpecked

    henpecked very small member

    Got Next on 17" rims???

    I'll take up position close behind [ sorry 'bout that] wa_zx, if he/she does not confirm, I'll take next option, have sent PM. just give us estimate on shipping to Sydney.

    thanks
     
  17. Zzz (AKA ZzzZzzZzz)

    Zzz (AKA ZzzZzzZzz) New Member

    Very interested in stock rims!!

    Any ideas on the cost of frieght to sydney??

    also what do they weigh out of interest?
     
  18. pexzed

    pexzed Forum Administrator

    Re: Very interested in stock rims!!

    PMd about the bonnet
     
  19. static existence

    static existence New Member

    INFO on 17" rims

    Ok guys,

    Hopefully this will answer ALL questions.

    The rims come with 1 mismatched INGS centre cap which you can see in one of my previous pics. here are the other 3 caps and the 4 spacers which come with the rims.

    [​IMG]

    Here are pics of the gutter rash.

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]


    About the offset, all it says on the back of the wheel is "40H 17"


    Freight is entirelly up to you and your responsibilty.
    The pick up address will be in Tweed Heads, NSW, 2485.
    The rims weigh approx 5kg each roughly, a bit more for the ones with tyres on them.

    Hopefully this has answered all your questions.

    Payement will be needed asap to confirm the deal as alot of people are saying "il take them, but how much is freight"

    You are welcome to deposit the $450 THEN organise freight aslong you dont take longer than a few weeks as they are taking up a bit of space in our shop.

    This goes for the stock rims aswell.


    Thanks guys
    Matt ;)
     
  20. HYPA-NOVA

    HYPA-NOVA New Member

    Stock tryes&rims

    Are the stock tyres and rims from a jap TT?
    for a TT the rears should be slightly wider.

    Thanks,
     

Share This Page