Hi Guys I just brought a car alarm with central locking. I am not to sure what other ithems i need. Do 1990 Z's have actuators? or do i have to buy some? Thanks Andrew
That was quick!! one more ? Thanks for the fast reply, can i push my luck and ask if you know what colour the wire is?
Sorry don't know off hand, BUT check the tech section, all the wiring diagrams should be there. Best of luck with the install Regards Trev
Thanks!! I will have ago on the weekend. You need to kill that bug running around on my screen:biggrin:
Wire colours.... Blue & Green. Blue to Lock, Green to Unlock (off memory, but i've killed a lot of brain cells since i've done mine
HUH when I did my alarm instal I took the little solinoid out of my NA which connects to one of the tabs on the stock central locking. I thought you need a solinoid to activate it electrictly. So you can tap into stock central locking with out the use of a aftermarket solinoid ?
No, this is for the passenger side. You'll still need a "master" actuator. The stock master actuator on a Zed is not electronically controlled. It is physically locked or unlocked by you turning the key or switching the lever on the door. For a remote central lock, you need an electronic master actuator for the main door. but you can tap into the passenger door via the stock pass side actuator.
so do i need a "master" actuator ? I have 2 actuator left over from my RX3, but i used the master one on it. So as it is now with the key, what tells the pass side to unlock/lock when you use the key on the driver's door? Thanks for the help!! Andrew