HOW DO I TURN SAFETY BOOST OFF

Discussion in 'Technical' started by driftz_in_heelz, Feb 23, 2006.

  1. driftz_in_heelz

    driftz_in_heelz New Member

    AND WILL IT AFFECT ANYHTING. SORRY IF THIS HAS ALREADY BEEN DISCUSSED. (IM SURE IT HAS)
     
    driftz_in_heelz, Feb 23, 2006
    #1
  2. rom-vg30dett

    rom-vg30dett Always Broke

    you can't turn it off...

    you have to fix it. if your in safety boost you have a problem which needs to be fixed. searching will provide a lot of possible reasons why you are in safety boost and how you can fix it.

    LaterZ
    Chris :zlove:
     
    rom-vg30dett, Feb 23, 2006
    #2
  3. SIM300

    SIM300 FAKE MODERAT0R

    Hook up with your fellow WA members ASAP...

    Seems you have a LOT of questions, which can easily be anwsered.
     
    SIM300, Feb 23, 2006
    #3
  4. slicktoptt

    slicktoptt New Member

    SAFETY BOOST

    More than likely its a det sensor issue.. i had the same problem, all you need to do is salder a 1 ohm resistor on the det sensor plug at the back of the motor .:LOL: sound simple huh? there should be some advice on the tech links or try zed4life , you should take it to someone who can plug your computer into the software and that should give you a fault code ( code 34 det sensor ) good luck..;)
     
    slicktoptt, Feb 23, 2006
    #4
  5. Chad_

    Chad_ Well-Known Member

    Re: SAFETY BOOST

    USE the tech page...alot of stuff to read, so go through it thouroughly...almost all of your questions are answered in here...
     
    Chad_, Feb 23, 2006
    #5
  6. SIM300

    SIM300 FAKE MODERAT0R

    Safety boost can be caused by a number of things...

    & could be nothing more than a bad eletrical connection.

    Like I said before, get one of the WA members with datascan to scan your ECU for faults.

    Best of luck.
     
    SIM300, Feb 23, 2006
    #6
  7. K-zed

    K-zed Secret Squirrel

    See Tech Index /Detonation

    ... err, WRONG.

    It's a 1 meg ohm resistor.:) But read up on the Tech Article as it is ONLY a temporary fix! BEWARE: Detonation may cause engine damage.
     
    K-zed, Feb 23, 2006
    #7
  8. minivan

    minivan Guinea Pig Test Monkey

    i'll be up at toms(zrated) house tommorrow (saturday) and we both have laptops and datascan(ecu diagnostics), can give your car the once over.. we're removing two Z engines.. so should be fun

    if you wanna come up there (quinns rock) give us a yell at

    delcarlo@iinet.net.au and we'll have a look at your car for ya and tell you what needs doing

    cheers
    Andrew
     
    minivan, Feb 24, 2006
    #8
  9. slicktoptt

    slicktoptt New Member

    DET SENSOR

    Unless your running high boost ( 14-18 ) detonation is very unlikely... run 98 ron and up to 13psi and you shouldnt ever have a problem.. :thumbsup:
     
    slicktoptt, Feb 24, 2006
    #9
  10. minivan

    minivan Guinea Pig Test Monkey

    Re: DET SENSOR

    unless your cas is rooting up or set incorrectly and firing too advanced, or maybe a bad batch of fuel,

    det sensor is there for a good cause
     
    minivan, Feb 24, 2006
    #10
  11. driftz_in_heelz

    driftz_in_heelz New Member

    Sorry

    Sorry thanks for the offer but i have a VERY hectic w/e! Someother time tho for sure, that'd be great!;)
     
    driftz_in_heelz, Feb 24, 2006
    #11

Share This Page