help anyone ?

Discussion in 'Technical' started by heath711, Apr 15, 2011.

  1. heath711

    heath711 New Member

    Messages:
    58
    Likes Received:
    0
    Trophy Points:
    0
    hi i changed my fuel lines seeing as they were backward's. put all new fuel in and kicked her over all this black smoke. still nothing cleaned my plugs and leads im just wondering if anyone can give me some advice on what i should do . ??
     
  2. Mclovin

    Mclovin Well-Known Member

    Messages:
    2,397
    Likes Received:
    36
    Trophy Points:
    48
    They were backwards meaning to fuel send/return? did you remove the balance tube to pull the coilpacks? if you so did you seal the balance tube with new O-rings?

    Are you sure the fuel lines are right now?
     
  3. gmbrezzo

    gmbrezzo Moderator

    Messages:
    3,138
    Likes Received:
    8
    Trophy Points:
    38
    Yes he is, as I picked this up from his garage photo and called him direct.
    Sent photos and talked him through it.
    Got him to clean out stale fuel from the tank and replace with 20lt clean premium fuel.
    He says the timing is correct and has spark (not sure on this one - running a S1 PTU)
    I asked him to do a compression test.
    All I can think of is possible PTU or a faulty sensor but he said he has done an error check and all shows OK.
    The kids not far from Taree is anyone nearby that could help?
     
  4. 300ZXpression

    300ZXpression Member

    Messages:
    25
    Likes Received:
    7
    Trophy Points:
    18
    Have you tried forcing it to start with partly open throttle or wide open throttle?
     
  5. heath711

    heath711 New Member

    Messages:
    58
    Likes Received:
    0
    Trophy Points:
    0
    yeah everthing is right im pretty sure lol ill take a photo and put it up and use can tell me im not the best with these cars
     
  6. heath711

    heath711 New Member

    Messages:
    58
    Likes Received:
    0
    Trophy Points:
    0
    yeah and agian thankyou very much graham you have been such a help mate champion you are
     
  7. heath711

    heath711 New Member

    Messages:
    58
    Likes Received:
    0
    Trophy Points:
    0
    yeah iv tryed everthing i know and still nothing . when i got the fuel lines right and started it all this black smoke and a hell of a lot of it and a boom boom boom sound comeing from the exhaust makeing sounds like she really wants to go but i just keep killing all my batteries :(
     
  8. mholt

    mholt Member

    Messages:
    587
    Likes Received:
    0
    Trophy Points:
    16
    Location:
    Cameron Park
    did you try some aero start down the intakes with throttle open and someone turning her over works everytime
     
  9. heath711

    heath711 New Member

    Messages:
    58
    Likes Received:
    0
    Trophy Points:
    0
    um not yet where do i spray the aero start ?
     
  10. Altari

    Altari '89 2+2 TT Manual

    Messages:
    596
    Likes Received:
    2
    Trophy Points:
    38
    Location:
    Australia
    CAS/PTU? Tried another ECU?
     
  11. heath711

    heath711 New Member

    Messages:
    58
    Likes Received:
    0
    Trophy Points:
    0
    nar i havent they is no 1 close by to me i can borrow 1 off so ill have to buy 1 ill upload some more info today when i work on it thanks mate
     
  12. bobbylat

    bobbylat New Member

    Messages:
    202
    Likes Received:
    0
    Trophy Points:
    0
    that car he has is the old one i used to own lol, its thrashed as **** let me tell u that. but it does have motec ecu and one of those 600 electric BOV, ran fine when i had it... bet the guy who got it before u harth777 ran to much boost and ruined it as he was a noob.
     
  13. OZX_320

    OZX_320 Detachable Member

    Messages:
    2,150
    Likes Received:
    25
    Trophy Points:
    48
    it DIDNT have the Motec.... or the advertised Haltech for that matter :mad:
    and you're right... its fubared... and not just the motor
     

Share This Page