My car wiring has always been kinda stuffed, but last week i put in some new headlights as the old ones were on the way out. Now whenever i turn on my lights only highbeams come on, no matter whether they are activated or not, now i know the headlights work fine as i tested them, any clues? or should i just bite the bullet and drop the Z into an auto electrician? Cheers Guys:thumbsup: JayKay
Ha Ha i know im dumb, but im not that dumb No all the fuses are fine, it just appears that my car likes high beams now, also my driving lights arent working either
Have a little read of this......>> From the old FAQ. http://www.neuralmotion.com/forum/faq/headlights.htm
Thanks I feel like a bit of an idiot, thats the one fuse i must have skipped, thanks again guys for the fountains of Z knowledge JayKay
Hey JayKay it sounds like a relay has welded its contacts closed the next thing is to locate it and pull it apart and clean the points. There are actually 3 relays that I know of in the black box (passengers side on front guard) :unsure: You need a little screwdriver to push on the tongue on their side in order to release them. Then use a multimeter and check the relay coil and the switch position not hard as there is a circuit diagram on top of the relay with numbers which correlate to the pins underneath.:wacko: Have I lost you yet well if I have take it to an auto-electrician :thumbsdown: but if you are a little handy you should be able to work it out from there. Drop us a line if you get stuck. regards John
