Hi alll firstly hope everyone had a safe and good easter and enjoyed their toys as much as possible. Some good weather in places so what better reason than to drive, drrive, drive............. Ok now the question. I have done a search and many times, so if I have missed it please forgive me. I have in my baby in the front bar a set of clear indicators. Taking them out to put in orange bulbs I see that behind the indicator light in the lens is a hole/plug that takes a bulb. I am going to change my lights to led's and want to put my parkes in with the indicators. The plug section has 3 cut out lug sections, like the standard T-10 globe holders but the 3 would be at lets say; 12 oclock position, 4 oclock position and 8 oclock position. It is larger than a T-10 plug not not as big as the larger standard parker sockets. I have looked and looked and cant find anywhere where to get that fitting or anyone have any ideas of how to convert it or is there some type of converter 1 can get so I can finally use this socket. Any ideas and help would be greatly appreciated. I dont want to "hack the housing but surely as the socket is there, there must be 1 available. PS: hacking the housing and fitting a standard plug still not much room between base of light bulb and glass PLEASE SOME ONE HELP>>>>!!!!!!!!!!!!!
1)take the light to the wreckers and ask them if them have a wiring harness still in a car with similar or same connector. 2)go to auto pro.they have sockets. 3)pm tektrader i bought my lights from him,he already had the bulb holders in place. 4)too late at night for 4. good luck
I had two different size globes in my front parkers and I changed them both for LED's. Happy to show you. I'm in the northern suburbs, PM me your address if you want to have a look.
