NSW For sale - Nismo 555 injectors in ceramic coated twin feed rails, + mixed other stuff

Hey Folks!

Skint right now so I have to sell some stuff.

All prices are plus postage, although with the diff I would prefer pickup.

Nismo 555 injectors installed in modified ceramic coated fuel rails. These suite a series 1 plenum setup.
I had the rails converted to run speedflo fittings and dual feed and return. Last year I had the injectors serviced and flow tested, and fitted to the rails with all new 0-rings. -6 AN fittings were braised onto the ends of the rails. I also have the black kevlar re-inforced braided hoses I used to run from a mallory twin port filter (not for sale), to a Turbosmart 1200 twin feed fuel pressure regulator (not for sale) mounted on the pass side near where the stock filter was. There was already bolt holes in the body so it's an easy install. Or you could modify to use whatever brand fpr you use. Only the 2 longer braided return hoses from the front of the motor might be of use considering my choice of filter, but i'll include the 2 45 degree fittings at the feed end near the firewall. That way you will only need to sort out your own hosing from your filter the use a Y adapter for eg, to split to the rails.

The injectors and rest of the setup had at most about 300 klms use before my engine let go.

555's installed in ceramic coated rails and new upper and lower o-rings - $750
and the 2 longer black braided hoses with 6 fittings in total - $100









Reg not for sale, just showing how the lines hook up


89 TT Diff and subframe, no arms or shafts. Car had 126,000 on it - $200



TT plenum - Unmolested - Great to start polishing - $100



TT Throttle bodies - I can remove the water pipes if required for a cleaner look, assuming you've done the under plenum water bypass - $50



TT power steering pump - 100% in working order when removed last year to convert to NA setup - $100



TT over engine fuel hard lines - ideal for chroming - $15
Fuel dampener and Fuel regulator - Working fine when removed last year - $10 each
Fuel filter holder - Again, good for heading down to bling town - $10



passenger side timing cover good condition - $15



Passenger side (I think) rubber accordian turbo inlet pipe - Good condition - $15
2 of the 4 pipes from the front of the engine, these are the 2 longer ones and are in good condition, the shorter ones were shagged - $10 each



89 TT power steering reservior - $25



Stainless steel lower water hard pipe. I had this made to suit my setup which had a thermo fan sensor in the radiator return hose, so it's a bit shorter along the bottom than normal ones you can buy, but this isn't a problem, just use a elbow with a slightly longer section - $45



Front water hard pipes - Good for polishing - $50



Some other odds and ends I don't have pics for right now.

Cabin blower fan - $25
Air con core - $25
Heater core - wasn't leaking when pulled a few years ago from wreck, but no guarantees now i'm afraid, I could pressure test if required - $25
Power steering rack, one rod end is slightly bent, but rest is fine. Missing solonoid that makes the steering heavier at speed though. - $70

Any questions don't hesitate to ask.
I'm located near Wollongong NSW if you want to pickup.

Cheers

Ben

 

I will have the 2 coolant pipes please. PM me etc

 

I'll take the Injectors, rails, and fuel lines

Hi mate,
I'll take the injectors, rails and the longer fuel lines to suit.
Please let me know how much to post to 5094 and supply payment details.

Cheers,
Dave

 

No worries fellas, i'll box them up and get quotes.

Ohh Graham I nearly forgot. I still own you money so you can have the pipes no charge ok?

Ben

 

Price reduction!!

Diff - $150
TT plenum - $80
Throttle bodies - $30
TT power steer pump - $80
TT over engine fuel hard lines - $5
Fuel dampener and Fuel regulator - $10 each
Fuel filter holder - $5
3 turbo hoses pictured - $5 each
tt power steering res - $20
stainless bottom rad water pipe $35
power steering rack - needs one new end, and missing solonoid to control steering weight at speed - $50

Cheers
Ben

 

ill take the plenum

jared - 0410345681

please call asap for pick up details

 

Throttle bodies/fuel hard lines and s/s bottom water pipe, thanks Ben.
Pls PM me with details for payment...
(Let me know if plenum doesn't sell).
Mike (mikemd)