everything must go 2..........

Hi all, new thread as most stuff from the last was sold. I have 2nd round bits listed below. Getting to the bottom end of things now but can still pm me if you need something that isnt listed. All prices are ex postage

Turbos in fantastic condition, no shaft play and turn perfectly from an auto motor. $300 for both

Turbos in crap condition, one turns with slight noise and the other is hard to turn, from a manuel good for a high flow or rabuild job I suppose. $60 for both.

1 AFM in great condition. $180

1 new clevite main bearing set $30



1 set stock nissan VG30DETT conrods in good condition $160


2 stock balance pipes $25 each


various other stock hard pipes, let me know what you need! $10 each

2 sets of heads, no covers and no cam pulleys but everything else. $100 per set.




2 upper plenums with throttle bodies. $100 each


2 lower plenums. $50 each



2 fuel rails with stock injectors $50 each

see above images

2 of those plastic guards that go around the spark plugs. One set is perfect and one set has a small defect along the edge due to cracking. $50 for good one. $30 for not so good one.


2 stock harmonic balancers. $50 each
or with full stock pulley set $80


2 stock oil pumps from working engines. (I would still crack them open and make sure) $50 each


stock water pump in great condition $50
stock water pump in good condition $40


2 working fan clutch assemblys $45 each


2 stock nissan fans in good condition $75 each


1 old wiring harness. some plugs missing but most still there. $20


lower timing cover in good condition $20


facing the front of the engine, 2 right hand side plastic timing covers in good condition $25 each


2 left hand side plastic covers with cracks $free


2 stock radiators $25 each

various brackets, let me know which ones you want $10 - $20 each

stock engine mounts $30 each

2 sets of stock manifolds. $35 each



thats it for now folks. Like I said at the top, PM me if you see/ want something that isnt listed and Ill see if I have it.

cheers

zeb

 

Im looking for the fuel rail (the one that runs parallel with the balance pipe on top of the plenum). Mine's rusty. Have you got one in good condition?

 

I thought that the fuel and balance pipes were the one piece? and my understanding of the fuel rail is the part that runs around both sides of the lower intake and supplies the injectors with fuel. Correct me if im wrong?

If you can show me a picture of what you need, that would be handy.

cheers

 

Will try to show u a photo later. For d meantime, it's not welded or permanently connected to the balance pipe. It's that metal system of hard pipes which runs in front of the balance pipe. Smaller in diameter but...

 

hm,mm, I think I might know the bits, I have two or three of those systems. Ill check and see if I can get some photos. might be a push to get them before the weekend though as Im off for three days down south. Ill try though

cheers

zeb

 

Tnx zeb. Will look forward for that. Cheers.

 

Zeb would you have a air-con compressure in good condition.
Eddie

 

Update

Turbos in fantastic condition, no shaft play and turn perfectly from an auto motor. $300 for both EOI Eddie

Turbos in crap condition, one turns with slight noise and the other is hard to turn, from a manuel good for a high flow or rabuild job I suppose. $60 for both.

1 AFM in great condition. $180 Sold

1 new clevite main bearing set $30 Sold



1 set stock nissan VG30DETT conrods in good condition $160


2 stock balance pipes $25 each


various other stock hard pipes, let me know what you need! $10 each

2 sets of heads, no covers and no cam pulleys but everything else. $100 per set.




2 upper plenums with throttle bodies. $100 each


2 lower plenums. $50 each



2 fuel rails with stock injectors $50 each 1 remaining

see above images

2 of those plastic guards that go around the spark plugs. One set is perfect and one set has a small defect along the edge due to cracking. $50 for good one. $30 for not so good one.


2 stock harmonic balancers. $50 each
or with full stock pulley set $80


2 stock oil pumps from working engines. (I would still crack them open and make sure) $50 each


stock water pump in great condition $50
stock water pump in good condition $40


2 working fan clutch assemblys $45 each


2 stock nissan fans in good condition $75 each


1 old wiring harness. some plugs missing but most still there. $20 EOI Chad


lower timing cover in good condition $20


facing the front of the engine, 2 right hand side plastic timing covers in good condition $25 each


2 left hand side plastic covers with cracks $free


2 stock radiators $25 each

various brackets, let me know which ones you want $10 - $20 each

stock engine mounts $30 each

2 sets of stock manifolds. $35 each

 

Hey, have you got a TT tailshaft?

 

I am looking for a Power steering pump if possible??

 

I may have a 2 seater one avaliable...?

 

Also after this same part that Arvin is reffering to, the fuel supply/return hardpipe in front of the balance tube.

Thanks Matt

 

hey guys, I have two of these. You are talking about the fuel feed lines that have a bit of hard and some soft lines and are connected to the dampner and the reg!!!
Im sure thats the right bit now. So you just want the hard lines? I'll take some photos and work out a price for you.

cheers

zeb

 

Yer there the ones, two pipes joined together one supply and one return

 

I just need the hardlines. But that's only if it's also in good cosmetic condition. Tnx man. Looking forward to the pics...

 

Zeb, what brand A/C compressor was fitted to the car

 

update and price drop

Turbos in fantastic condition, no shaft play and turn perfectly from an auto motor. $300 for both sold

Turbos in crap condition, one turns with slight noise and the other is hard to turn, from a manuel good for a high flow or rabuild job I suppose. $60 for both.

1 AFM in great condition. $180 Sold

1 new clevite main bearing set $30 Sold



1 set stock nissan VG30DETT conrods in good condition !!!Price DROP!!! $80


2 stock balance pipes !!!Price DROP!!! $20


various other stock hard pipes, let me know what you need! $10 each

2 sets of heads, no covers and no cam pulleys but everything else. !!!Price DROP!!! $60 per set




2 upper plenums with throttle bodies. $100 each


2 lower plenums. $50 each



2 fuel rails with stock injectors $50 each 1 remaining

see above images

2 sets of those plastic guards that go around the spark plugs. One set is perfect and one set has a small defect along the edge due to cracking. $50 for good set. $30 for not so good set.


2 stock harmonic balancers. !!!Price DROP!!! $30


2 stock oil pumps from working engines. (I would still crack them open and make sure) $50 each


stock water pump in great condition!!!Price DROP!!! $30
stock water pump in good condition !!!Price DROP!!! $20


2 working fan clutch assemblys $45 each


2 stock nissan fans in good condition $75 each


1 old wiring harness. some plugs missing but most still there. $20 EOI Chad


lower timing cover in good condition $20


facing the front of the engine, 2 right hand side plastic timing covers in good condition $25 each


2 left hand side plastic covers with cracks $free


2 stock radiators $25 each

various brackets, let me know which ones you want $10 - $20 each

stock engine mounts $30 each

2 sets of stock manifolds. $35 each
[/URL

 

Any passenger wastegate actuator in good condition? PM me pls if ever. Thanks.