See this http://www.aus300zx.com/forum/showthread.php?t=313921 The Brackets will be plasma cut, and will suit all auto and manual TT-NA zeds. The bracket will work with the stillen damper kit, I recommend using the stillen kit because it comes with the bottom bracket supplied. The top bracket will come with two slightly longer (3mm) balance tube bolts for those who want them. This will be a one of buy, no money will be collected until have the brackets in hand ready to send out. The brackets will be plain 3mm steel no finish applied, so the finish is up to you. The brackets should be available towards the end of next week 5/11/2011 Show your interest here. Beaver 1 jinxed 2 DJHZEX 1
Forgot that, about $40 odd each posted, a little more with longer balance tube alien head screws if anyone wants them.
Beaver 1 jinxed 2 DJHZEX 1 rob260 1 ABZ300 1 reyoh 1 tektrader 1 ryzan 2 Interested, providing that they are compatable with manual clutch booster and cruise control already fitted.
Ok here's the way stillen recommend fitting the bottom bracket. Clears the booster easily, check the photo's. http://www.thenismoshop.com/assets/images/stillen/309332inst.pdf
Update It was a short week last week, the shop (long range automotive) had monday tuesday of for melbourne cup, nothing was done so I dont have a bracket to teast fit. Anyway this week for sure so Im told.
The car pictured is LHD, the bracket will not fit in that position in a RHD car. It must be mounted forward of the balance tube to clear the brake master, this will give you clearance issues with the clutch booster connection on manual cars.
The cruse control is on the rhs in both u/s and oz cars, the dampers rod end is mounted on the new bracket froward of the balance tube, the pics show that clearly, I'm possibly missing something, or your on the piss.
I'm possibly missing something now that I've had another look at the cruse control setup on our cars, (sold my c/c to fate long ago) I have to agree with our learned friend a2zed and say my bad, the damper wont work with the cruse control in place.
Have a look at the pic in the other thread of Brisz's car. Fits nicely with cruise. If you make the top bracket to clear the clutch booster port, you won't have a problem.