ECU Harness Connectors - Anyone interested?

Discussion in 'For Sale by Businesses' started by tom@pzp, Aug 15, 2006.

Thread Status:
Not open for further replies.
  1. tom@pzp

    tom@pzp www.pzp.com.au

    We haven't made our purchase yet however we are able to get the following connectors for the 300zx... Just wondering what sort of quantities we should order so if you are interested, just let us know if you need any of the following... Prices are not yet known but will vary from $12 - $30ish for the big expensive ones.
    • OEM 2pin Injector (Black)
    • OEM 2pin Water Temp (Yellow)
    • OEM 2pin FICD Solenoid (Blue)
    • OEM 3pin Throttle Valve
    • OEM 4pin CAS
    • OEM 6pin AFM
    • OEM 6pin PTU
    • Aftermarket 6pin PTU
    • Aftermarket 7pin PTU
    • OEM 2pin VTC/Detonation Sensor (Harness Side)
    • OEM 2pin VTC/Detonation Sensor (Solenoid Side)
    • OEM 3pin Coil Pack/O2/TPS (Harness Side)
    • OEM 3pin Coil Pack/O2/TPS (Solenoid Side)
    • OEM 2pin WasteGate Solenoid (Harness Side)
    • OEM 2pin WasteGate Solenoid (Solenoid Side)
    Such a good time to replace the connectors that are hard to buy... CAS/AFM/PTU/WateGate and the colour coded water and ficd... :cool:
     
    tom@pzp, Aug 15, 2006
    #1
  2. carzone

    carzone in the corner crying!

    how long u keeping this open for?? Also what are the injector plug prices?? As im only proberly after < 5

     
    carzone, Aug 15, 2006
    #2
  3. EvZ

    EvZ 1BAD300

    So what will a set cost? 15 x ($12 - $30ish)? That's going to add up fast. How much is a new harness?

     
    EvZ, Aug 15, 2006
    #3
  4. MexiCandu

    MexiCandu Grumpy of the Grampians

    I paid $835 for a complete harness 2 years ago. A lot of work to install too.
     
    MexiCandu, Aug 16, 2006
    #4
  5. tom@pzp

    tom@pzp www.pzp.com.au

    it's definately going be a lot less than a new harness, however if you only have a few broken connectors, why remove the dash and replace the harness for a few connectors?

     
    tom@pzp, Aug 16, 2006
    #5
  6. rodo

    rodo Senior Member

    Injector plugs

    Could you tell me if the injector plugs will be OEM style 90-93's have the offset key as opposed to the Bosch ones that a lot of people use (centred key) and file the key off the injector. If they are the offset one's put me down for 2 sets (12) of injector connectors and 6 of the Yellow's (fix my son's VL while i'm goin) I've actually got about 70 blue connector's but no terminals Are you interested ? Cheers
     
    rodo, Sep 27, 2006
    #6
  7. jaybo

    jaybo New Member

    i don't understand how i work out which one's i'd need.
    i just need the coil pack connectors, i'm guessing they'd be the harness and solenoid sides i'm after.
     
    jaybo, Sep 28, 2006
    #7
  8. WazTTed

    WazTTed Grease Monkey

    might be keen on a new cas and afm, whats the damage son?
     
    WazTTed, Sep 28, 2006
    #8
Thread Status:
Not open for further replies.

Share This Page