ECU CHANGEOVER

Discussion in 'Technical' started by Ricky, Feb 21, 2007.

  1. Ricky

    Ricky New Member

    When I got home tonight there was a parcel containing supposedly a 1992 auspec ecu for a 1992 na auto.(PURCHASED FROM ebay)I wanted to c/o and test against my jspec ecu in my 1990 na auto....mainly due to slight pinging problems on these hot days.My car runs at normal temp at all times even with the aircon on and gets about 450 k before the fuel gauge says empty.
    I did the c/o bit reconnected the battery,car turned over ok but wouldnt start,put my jspec back in,starts first time.My questions are...did I do it right,all went together ok,or maybe the ecu is stuffed?
     
  2. blue32zx

    blue32zx The answer is 42

    post up a pic of the ecu and the code written on it.

    some1 might be able to cross reference it

    ryan:cool:
     
  3. dazmelb

    dazmelb New Member

    u probably should have talked to simon from ttzed and run "ConZult" before u purachased the ECU as fuel efficiency probs can be due to a number of things such as O2 sensors. u can call him on 0418412241 or 98427699. he can be a little hard to get a hold of.
     

Share This Page