DressUpBolts.com Titanium and Stainless Steel Fastener Replacement Kits for Z32+VG30

If you are unfamiliar with DressUpBolts.com we specialize in the most complete Dress Up Bolt Kits in the highest quality materials and finishes available. All of our kits meet or exceed OEM spec's.

Here is a little info on our Company and our Kits:

DressUpBolts.com was started to fulfill the need for a quality replacement fastener for automotive engine bays and engines. Sure, you can go to your local home improvement store and find something that will "work" but then again pvc piping will "work" for you I/C pipes too.. right?

We design each of our pieces (Bolts, Nuts, and Washers) in-house using CAD. We pick the designs that are the most aesthetically pleasing, but will also provide a greater strength than an OEM fastener. These are engineered by us from start to finish.

~Our Titanium kits utilize Grade 5 Titanium (Which is stronger than Grade 8 Stainless Steel!)
~Our Stainless Steel Kits utilize Grade 8 304 Stainless Steel
~We offer the most COMPLETE Dress Up Bolt fastener replacement kits on the market today.
~All of our kits will be accompanied with installation instructions, no guess work, just remove and replace! It's that simple.
~Unique Head design creates a truly custom look, these aren't some junky fasteners you can buy at a hardware store like a lot of "dress up kits" out there.
~Drastic improvement over factory fasteners in terms of looks and durability, our fasteners will never rust!

Titanium Colors Available:

Blue
Gold
Green
Polished
Purple
*Black (limited time only)

















-----------------------------------------------------------------

Z32 ENGINE BAY KIT DETAILS

Here is the Z32 Engine Bay Kit, it will include 68 Titanium or Stainless Steel Pieces and will cover just about every visible bolt and nut in the engine bay.. down to the Master Cylinder nuts! *(please note the Remote Clutch Bleeder Bolt is no longer included).

Here is what the Z32 Engine Bay Kit replaces:



VG30DE/TT ENGINE KIT DETAILS:

The V30DE/TT Engine Kit includes 47 pieces total, is only available in Titanium. Here is a picture of everything included in the VG30DE/TT Engine Kit:



The VG30DE/TT Engine Kit includes hardware for the following areas (each one is also available seperately, pm for ala cart pricing):

Upper Timing Cover Kit - Includes 13 Pieces. It comes with OEM spec shoulder bolts, that do away with those pesky dried out useless spacers. *Available in Titanium Only

CAS/PTU Kit - Includes 7 Pieces. This kit will replace the hardware that secures the CAS, and attaches the PTU. If you have relocated your PTU this kit will fill the holes and look great doing it! *Available in Titanium or Stainless

Balance Tube Kit - Includes 5 Pieces. Replaces all of the hardware the secures the balance tube. Please note the nuts supplied in this kit are flange nuts, not Acorn style nuts like OEM. *Available in Titanium or Stainless

Throttle Body Kit - Includes 8 Pieces. OEM length bolts. This kit replaces the 8 bolts that secure the TB's to the plenum. Please note if you have aftermarket TB's the head on these might be a little to large. If this is the case, we can replace them with an OEM style titanium piece. *Available in Titanium Only

Throttle Linkage Kit - Includes 2 Pieces. OEM length bolts. These will match the Throttle Body bolts. *Available in Titanium Only

Coilpack Plate Kit - Includes 12 Pieces. This kit replaces the fasteners that attach the coilpack plates to the plenum. *Available in Titanium or Stainless.


------------------------------------------------------

Ok, Lets move onto pricing!

We will be doing a Group Buy here for you guys. All we need are 5 deposits to secure the following pricing:

Z32 Engine Bay Kit Retail: $249.99 USD
Z32 Engine Bay Kit GB Price: $189.99 AUD

VG30DE/TT Engine Kit Retail: $289.99 USD
VG30DE/TT Engine Kit GB Price: $235.99 AUD

We require a $25 initial deposit. Once we have 5 deposits, we will remove the deposit link, replace it with a direct order link and start shipping kits.

Please include the following in the notes section of paypal:

1) Full Name
2) Screen Name
3) Product(s)/Color Desired if Titanium


PAY YOUR PAYPAL DEPOSIT HERE

Shipping will be a flat rate of $15.00 via air mail for any of these kits. If you have any questions, feel free to PM me or e-mail me directly: sales@dressupbolts.com

Thanks!

Chris Bishop
Sales Director
Dress Up Bolts LLC
www.DressUpBolts.com

 

how much for the upper timing cover bolts and cas bolts ?

 

No Red ones.

 

Can we get a mixture of colours or does that cost extra?

 

They couldn't anodise the material red properly, or something along those lines. I read it on the US forum a while back

 

so will the finish on these scratch, or are they coloured right the way though, as often you can destroy the looks of a fastener by chipping colour of the edges when tightening.....

 

No, Titanium is unable to be anodized red.

Nope, just pm me and let me know which areas you would like which colors.

We haven't had any complaints of someone having the color scratch off. Under normal circumstances, you shouldn't have a problem. Even when tightening with a wrench.

However, we sponsor a time attack car here and they remove the front suspension extremely often, I checked out the nuts and there was a little wear on them but I would say they had been tightened and loosened (mostly with an air gun) ~100x's and trust me these guys were in a rush, the last thing on their mind is protecting the finish on the bolts.

 

awesome, will be getting both sets off you shortly.

 

Can you by chance supply the 7mm bolts for the Exhaust Cam Sprockets in S/S?

 

Hi, what do you have for the s13, not the engine. I had a look but could only find an sr20 kit. Also you wouldnt happen to have a VH45de engine kit?

Thanks

James

 

Sounds good!

PM Sent.

We have a S13 Kit available it's just not on the website yet. I'll send you a pm about the VH.

 

how long will the GB be running?

 

I'm sorry I forgot to add that in the OP. The GB will run until November 6th.

 

funnily enough i posted up your thread with the 2jz into the z32 a week ago, is that how you found the forum? lol

 

No, we have some really good Australian customers who recommended us to the site. I was quite shocked you saw it on vadriven, how did you come across it?

 

Have you done a total weight comparison if replacing everything you can supply with titanium from the stock stainless stuff? Be interesting to know what the difference is.

 

2jz z32 into google images and yours was the 4th one in the 1st row

100 grams?

 

..for real .....????????

 

stock bolts are definitely not S/S. Not 100%, but most are mild, some are zinc? plated and can be buffed to a polished finish, but will only last 12 months at most.
Should have kept the receipt tally, but an "extensive" conversion to S/S equivalents on motor only will cost in the vicinity of $300. Even going to the degree of 6mm fuel rail bolts,4mm injector pintle cap bolts.
If you're concerned about weight reduction possibilities, there's a 2g saving per cam cover if you go polished
Still waiting for weather to clear up to get thread lengths for 7mm exhaust cam sprockets. Rain and polished isnt a nice look

 

Are you saying the exhaust cam sprockets are 7mm in length or an M7 screw/bolt? I think it would be very hard to find an M7 S/S screw/bolt.