Decided to go for ashspec in tank dual pump setup. Not interested to move the battery in boot. All has been tested and working onder and used for less than 10 hours. However I didn't buy them new. Bought from local seller who uograded to tripple pump system in R34. All three for $680 plus post. Or Aeromotive A1000 pump $350 10AN out 10AN in Aeromotive A1000 controller $250 Almost new KRC washable filter $80 (Boughtt new from Go gear, used less than 10 hrs) 6AN out 6AN in.
Whats the model number on that controller? It looks like the real old one without the heatsink on it. The new one is a fair bit different. I am interested if I can work out what the difference is between yours and the new one.
no real difference. I couldn't afford the new controller which was 800 USD plus postage. I have the instruction manual in pdf which can be passed on. It has two speed setting which is rpm based and can be changed in different rpm, i. e 2000 or 3000 rpm to run the pump in full speed. You can check what extra has included in the new controller.
Ahhh OK, This is the older unit that was superceeded about 5 years ago. There must have still been 2 versions of it. One with a billet casing like yours and another with a cast heatsink style case. I am interested but Not at that price seeing the new version is only a bit over $300. If you will take $130 posted then I will buy it. These ones are unrepairable as they are potted in epoxy resin.
