Just got new tyres after last ones were worn quite oddly. The insides were worn terribly, especially the rear right wheel, was down to the wire on the inside edge. I don't want this to happen again, so wondering what i should do to safeguard myself from premature wear. I have read fixing the camber will fix around 80% of my problem and the toe will rectify the other 20% or thereabouts. So what brands and styles, examples,pro's con's, deals on kits for camber/toe for front and rear. I don't want to be spending top dollar, as it isn't a drift or racecar, just a first car for my p's, saying that i don't want cheap and nasties that will last a few months and may gain troubles. Also any brands/styles i should steer clear of? Thanks in advance for your time and opinions/advice.
You need this..... LINKY-POO Rear upper control arms. This will solve your rear tyre wear issues. if you have front tyre issues also, then check out the front control arms and tension rods on the same link.
