Anyone knows a au based company called performance springs? They have valve springs for our z in a decent price with really good specs. Have...
Guys just solved it. As i suspected the low voltage was the problem. I checked the ignition and eccs relay and realized that the eccs relay was...
That's possible too. I want to log a run with consult but the weather doesn't let me. The base timing is OK though, checked it yesterday 15...
I use z32 ecu-wiring loom so i have a det sensor. But i dont use any of the original actuators or lines. never used them so its not the case. Any...
As I said in a previous post the wastegate vacuum line is new and direct from the turbo to the wastegate. I made many boost leak tests and there...
I changed the wastegate line with a new one straight from the turbo to wastegate.no boost control or bleed valve. The wastegate came out and...
But there was no problem before for the wastegate to control the pressure even with the turbo brand new. The problem is somewhere else but I...
Hello from Greece. Long story short, Vg30det, single turbo pte 5857, tomei poncams, chipped ecu, sard 880, tial 38mm external wastegate. Got the...
just for the history, I finally bought m/t 26/10/15 slick. first race for my car and everything went well. 11.5 @189kmph 1,5 60ft....
hello, I wanna drag race my 240sx vg30det what tire size do you recoment? will 26/8.5/13 drag slick be enough or should I use 26/10/15 drag...
I don't know about aem wb but the innovates simulated narrow band works just fine. I run it for some years now and works very smooth. all...
That's my belief too. Either the cas is faulty or the tomei camshaft has the cas pin relocated. I am still waiting to get access to another timing...
I'm pretty sure thats the way I adjusted it. full clockwise to get 27deg. at center it was 35 for sure. I'm gonna take a look again on that as...
I run an ams underdrive pulley but checked that too. got the sparkplug out of the first cylinder and placed a screwdriver in and when the piston...
all sensors have been checked via conzult and everything is ok. the ecu says 15deg so there is no problem from there
Hello i had my engine recently rebuild and now im having the following problem. Cant get the timing at the stock 15deg. Turned all the way...
wow, sounds possible. The det engine has a different oil pickup as it has a different oil pan. The oil is been sucked from the front of the oil...
It gets worst... Now i hear a rod bearing ticking when the car is cold. So i'll strip it for sure and post the results.
But the tensioner is independent. The oil press doesnt affect it. This is happening to me, cold the press is far too high. It goes over the 8...
Done this already, double checked the tensioner and the belt. Done everything as the fsm says. Checked the tensioner and it is extended as...
Separate names with a comma.