Check for wear in you upper control arm.
Not sure what it is called but the bit where the petrol cap screws into has came out when filling her up the other day 300ZX 2+0. The 2 little...
Sorry... but that will not work. That is close but I think it is important to get this right. The AFM's run from 12V and both must be connected...
I used an OP AMP to buid the circuit that combines two AFM's in an averaging configuration that way the AFM's will not interfere with each other....
Bolts- - A 0, B 1, C 2, D 2 I'm in. 1. Adamness - A 1, B 1, C 6, D 6 2. 300ZXC - A 0, B 1, C 2, D 2 (Do I get at original GB prices because I'm...
As a note the composition of stainless steel is based on iron with chromium and nickel added as alloying elements. The magnetism properties will...
Sikaflex or ploymer adhesive I would use sikaflex (typically used on cars during manufacture) for the job or a cheaper version is K&H MS polymer...
Thanks for the input everyone. I have to wonder if the stuff can breath and how long it would take to get blocked? Bit or rain and road resin I...
It seems there is a problem with this car. It should be easy to spot. link
One possibility is that the front upper control arms may be over tightened. I know this sounds odd but there is movment in the upper control are...
q1 and 2 Q #1 the exhaust pipe will be very black and you will probably have soot on your number plate. Q #2 You probably have an intake...
Use a standard shift light kit and replace the globe with a small 12V buzzer from Jaycar.
Ask a mechanic to check the CO2 level in the coolant that will instantly tell you if it is a headgasket.
OK, which upgrade does your sig. pic. have?
which brake upgrade do you have ichizora?
The pulses out of the exhaust you feel by hand would be diminished on either or both sides for every second pulse at idle.
I run one Wideband O2 sensor on the PS and it displays and records on my car PC. It gave the same readings as the dyno O2 sensor where the DS was...
Have you tried adjusting the master cylinder? It may need adjusting because the clutch has worn. It is in a **** of a position to adjust....
This is better suited to people running water and methanol injection: You could use water and methanol to get better evaporation and cooling...
That all sounds cool mungyz. The only comment I would add is that it is that bigger brakes will have less fade and given that the rear brakes on a...
Separate names with a comma.