Twin turbo stuttering

Discussion in 'Technical' started by 3clipse, Jun 2, 2013.

  1. SIM300

    SIM300 FAKE MODERAT0R

    He can't just plug a stock ECU in. He has larger injectors.
     
  2. ezzupturbo

    ezzupturbo JDMAutomotive

    How big :-(
     
  3. Elcid2010

    Elcid2010 New Member

    Check your tps, Cas and timing. Possibly a bad fuel injector, I would ohm them all
     
  4. 3clipse

    3clipse #TEAMROB

    running nismo 555's, and no AFM, so stock ecu is out of the question.
     
  5. ezzupturbo

    ezzupturbo JDMAutomotive

    It will still start with 555's and no afm. It will rule out ecu if it still stuters/dies
     
  6. 3clipse

    3clipse #TEAMROB

    Ok, i'll add it to my list of things to check.

    Thanks!
     
  7. 3clipse

    3clipse #TEAMROB

  8. planetrobbi

    planetrobbi planetrobbi

    Check all your injector plugs are on tight too, mine had one loose one and would run intermittently on 5 cylinders took ages to track it down :eek:
     
  9. Anti

    Anti 14.7 x 14.7 = 44.1

    logan you can borrow my nisunted stock ecu tuned for 550's to diagnose
     
  10. 3clipse

    3clipse #TEAMROB

    Sweet, I might hold you to that
     
  11. dieseldave

    dieseldave Well-Known Member

    Logan, I suggested the CAS as in the video you can see the tacho rapidly reducing RPM the jumping up, which is significantly faster than what the engine could physically do and sounds. That is why I suggested it was the CAS as it appeared to be a lost signal.
    The fact that you said you have an after market ecu, and you have check the CAS and its plug, makes me lead to suggest to suggest that there is a limiter being hit. Does your Wolf ECU program have a limiter in it for items such as voltage, engine temperature, fuel or oil pressure, as a safety function? If so this may be the cause, and it might be worthy to check into those areas. Especially noting that it occurs almost at exactly the same RPM.
    This is what makes me believe it is not such items as injectors, and coils.
     
  12. 3clipse

    3clipse #TEAMROB

    Hmm thats a very good point.
    I'm not too sure about a limiter or anything. I am currently trying to find a laptop with a serial port that I can use, otherwise I will buy a serial to USB adapter.

    I'll be sure to check that out!
    Thanks
     
  13. ezzupturbo

    ezzupturbo JDMAutomotive

    just use a serial usb converter works fine on wolfs. here is a software download link
     
  14. 3clipse

    3clipse #TEAMROB

    sweet as, i was going to check out jaycar or something when i have time.. probably not until Monday though :'(
     
  15. 3clipse

    3clipse #TEAMROB

    Unfortunately for me, I borrowed Anti's nistune ECU and plugged it in today...

    It all runs smoothly -_-
    I am going to contact Wolf tomorrow to see what I can do about getting mine fixed, if not, I will be looking to buy a Nistune.

    Ideally, I would like to get mine fixed as I just sunk a lot of money into getting the Wolf tuned, and don't really have the spare money at the moment to pay for another tune :(
     
  16. BLACK BEAST

    BLACK BEAST SLICKTOP TT R-SPEC

    .

    sounds like the wolf still isn't tuned properly and finding someone is a task on its own .

    I would sink my money into a nistune . by the time you get the wolf tuned properly it may work out cheaper and easier with nistune for future tuning/upgrades.

    can always sell the wolf .
     
  17. 3clipse

    3clipse #TEAMROB

    This is true... I want to get a retune in the future anyway, not happy with mine at all.
    May as well cut my losses and see what I can do. Hopefully someone is selling a nistune on the cheap.
     
  18. pinmonkey

    pinmonkey New Member

    I am sure robbie from wolf will do what ever he can to help.. he is a good guy and stands behind his ECUs

    i have a v500 and have been happy with it since day one..
    the new iphone app is a nice add on too..

    damn i sound like a advert
     
  19. 3clipse

    3clipse #TEAMROB

    Yep I agree, He is a great guy, has been very helpful thus far.
    I will be calling tomorrow to see whats up, and if i can get it fixed or not
     

Share This Page