help - my speedo and power steering stop working every now and then at the same time

Discussion in 'Technical' started by chubby, Sep 1, 2010.

  1. chubby

    chubby New Member

    my speedo droped to zero and at the same time the power steering stopped working.

    this happens at least once a week now. and the stop working at the same time for about one minute , it then starts working again and all ok

    has anyone got any ideas

    any help is appreciated
     
  2. Jordz

    Jordz Fashionably Late

    Someone correct me if im wrong, but this sounds like an alternator/power steering fault. I had the same thing minus the dash dying. My power steering was leaking into the alternator. Killed it. twice. Chris (ezzupturbo) said something about the power steering and dash going at once. ask him :
     
  3. slapstickz

    slapstickz Banned

    your speed sensor is dead mate when it dies out so does your power steering. Ask around for a speed sensor on here it should fix it.
     
  4. ZDUCTIV

    ZDUCTIV Active Member

    Sounds like dry joints on your dash cluster. The speed signal is passed from the cluster to the PSCU so when the cluster signal goes, so will the power steering (fail safe mode)

    Check here
     
  5. Anti

    Anti 14.7 x 14.7 = 44.1

    +1
     
  6. chubby

    chubby New Member

    thanks heaps guys. that should help me sort it out .

    i really appreciate your help .

    cheers chubby
     
  7. rob260

    rob260 Administrator Staff Member

    Had the same thing a couple of years ago, definately speedo sensor.
     
  8. ichizora

    ichizora Loud

    yes it's speed sensor or a dry joint somewhere for the speed sensor.
     
  9. JT

    JT Track Addict


    +1 for dry joints on the back of the speedo, happened to mine about 10 years ago and I had the same symptoms as you.

    This is the direct link

    htttp://www.pexcom.com.au/z32cms/e107_plugins/content/content.php?content.246
     
  10. JT

    JT Track Addict

    Not necessarily, could be the cluster. See ZDUCTIV's and my post above
     
  11. Jordz

    Jordz Fashionably Late

    Yes, speed sensor is what ezzupturbo told me...sorry :D
     
  12. 300aj

    300aj Only one in Canberra

    guys...

    I've got similiar problem but has done GB changed would that be the earth wire loose or what do u guys think??

    cheers
    300aj


     
  13. chubby

    chubby New Member

    the fuel gauge also under read when the speedo dropped off.. when the speedo came back to life 10 minutes later, the petrol gauge starting reading correctly again
     
  14. laam

    laam Member

    I have a similar issue, basically the same except the speedo goes round to warp speed, not zero. Other symptoms the same, likely same cause?
     
  15. Lambo

    Lambo The Best Member

    I have a smiliar issue as well.. My speedo doesnt work when i start driving the car usually during the day when it is hot.. I give the cluster a good bang and most of the time it jumps back up to the speed im doing.. Could also be a faulty cluster that your experiencing mate, and the power steering could be coincedental.
     
  16. ZDUCTIV

    ZDUCTIV Active Member

    Sounds like dry joints in the cluster.

    Yes.

    As I said earlier in the thread, the power steering control unit uses a signal passed to it from the cluster. If you cluster isn't working, the PS likely won't be also.

    Get soldering guys.:zlove:
     
  17. chubby

    chubby New Member

    thanks again . this should help me get it sorted it out ...
    i appreciate your advice.

    cheers chubby
     
  18. N/A91zx

    N/A91zx New Member

    i have the same problem.
    did u end up fixing it?
    if so let me know how!?
     
  19. ichizora

    ichizora Loud

    Read the thread again lol, pull out your cluster and start looking for dry solder joints.
     
  20. mafi-zed

    mafi-zed the resident hoon

    if you guys don't get the problem sorted, i have a cluster and a speed sensor here for sale :D
     

Share This Page