QLD Performance Parts + wrecking car

Discussion in 'Car Parts for Sale or Wanted' started by sevenangrypenguins, Nov 22, 2013.

Thread Status:
Not open for further replies.
  1. sevenangrypenguins

    sevenangrypenguins Active Member

    Messages:
    829
    Likes Received:
    7
    Trophy Points:
    38
    I have decided I don't want to spend any more money on the Zed so it has to go or I will just keep pouring money into it. All of the funds will be going into my house deposit.

    So here is a few items.

    Stock engine apparently rebuilt at some stage, got it from Chrispy. Heads ported by Eric former A2Zed with heavy valve springs installed. New head gaskets installed. Doesn't blow any smoke makes good power, compression test to follow. Selling as a BARE engine. Can include stock cam gears/cams but wont be installed on engine.
    Bare engine $1500 or $2100 with Jwt R4+ cams.

    BDE intake cam gears 10000km use.
    $450

    Z1 adjustable exhaust cam gears.
    $250

    ATI Street damper.
    $450

    Plenum with larger 58mm? Z1 throttles type2.
    $400

    740cc Jecs injectors will include plugs.
    $400

    Haltech Platinum Pro Plugin ecu + map sensor and air temp sensor + input/output plug is pre wired also.
    $1500

    Quaife LSD with leader gears low km's since rebuild with new bearings.
    $2500

    GT28RS turbo's from Z1 about 10000km use + custom oil lines for easy install.
    $2000

    Complete custom made 3" Exhaust, 5 bolt ams dumps ceramic coated (a bit scratched up), high flow cats, one of the front pipes has a few dents from driving over rocks but doesn't affect performance, 2 resonators in the catback, magnaflow X pipe, twin magnaflow race mufflers also has 2 wideband bungs in front pipes.
    $1200

    Volk GT-C 17" wheels, front 8 +35, rear 9" +34. No gutter rash but the chrome lip has been damaged in some spots by something?
    $1200

    AMS exhaust manifolds, ceramic coated black.
    $500

    R33 GTR Brembo Calipers.
    $900

    4x Braided Brake lines ADR approved.
    $200

    Stock Recircs with BDE goose honk kit fitted.
    $70

    Nagisa Fender Braces.
    $280

    Twin Z type 1 rear wing un-fitted + Light. Local pickup only.
    $450

    Specialty Z high capacity oil pan with trap doors.
    $550

    Z1 platinum steel driveshaft only ~1000km's use. No vibrations, uses the stock rear cv type joint,
    hardy spicer yoke. cost was $800 landed in Aus.
    $600

    Powertrix Ultralight coilovers.
    $1000

    UAS type 2 front Camber arms.
    $500

    Dashboard in very good condition from a 96 model. Pick up only.
    $250

    Leather seats front and back re-trimmed at some stage fair condition no rips/tears. Pickup only.
    $500

    Black door trims from late model zed modified for seat belt on the door, good condition. Pick up only.
    $200

    UAS front strut brace, white.
    $150

    UAS rear strut brace, powder coated black
    $150

    Ultra Racing tension rod brace.
    $100

    Carcraze 56mm radiator barely used.
    $100

    All prices are plus postage.

    That's most of the big stuff, car is still complete so will take some time to strip it down and check parts. Open to reasonable offers. Prefer local pick up on all the larger items.
     
  2. Zano

    Zano Member

    Messages:
    444
    Likes Received:
    2
    Trophy Points:
    18
    Just asking, but what type of BDE gears are they, , the series 1's or 2's
     
  3. sevenangrypenguins

    sevenangrypenguins Active Member

    Messages:
    829
    Likes Received:
    7
    Trophy Points:
    38
    Series 1.
     
  4. _Robbo_

    _Robbo_ Active Member

    Messages:
    926
    Likes Received:
    0
    Trophy Points:
    36
    Pm sent
     
  5. Gumby

    Gumby Legit.

    Messages:
    126
    Likes Received:
    0
    Trophy Points:
    0
    pm sent

    Carcraze 56mm radiator barely used.
    $100

    pm sent but would i be right to assume its for a manual?
     
  6. _Robbo_

    _Robbo_ Active Member

    Messages:
    926
    Likes Received:
    0
    Trophy Points:
    36
    Ill take the fender braces as per pm. Should be able to organise pick up aswell
     
  7. OZX_320

    OZX_320 Detachable Member

    Messages:
    2,148
    Likes Received:
    25
    Trophy Points:
    48
    Very interested in motor pending compression test results

    Cheers
    Michael
     
  8. sevenangrypenguins

    sevenangrypenguins Active Member

    Messages:
    829
    Likes Received:
    7
    Trophy Points:
    38
    Also have rear subframe with d-project camber arms and traction rods, spl titanium hicas lock out that replaces the stock joints with heim joints, ES bushes throughout and the main mounts have alloy bushes. includes rebuilt calipers and RDA rotors with A1RM pads in there. Will sell complete for
    $800 pick up only.
     
  9. sevenangrypenguins

    sevenangrypenguins Active Member

    Messages:
    829
    Likes Received:
    7
    Trophy Points:
    38
    fender braces are sold pending payment.
     
  10. sevenangrypenguins

    sevenangrypenguins Active Member

    Messages:
    829
    Likes Received:
    7
    Trophy Points:
    38
    few pic I already have, more photo's to come.
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    installed to subframe now.
    [​IMG]
    [​IMG]
     
  11. sevenangrypenguins

    sevenangrypenguins Active Member

    Messages:
    829
    Likes Received:
    7
    Trophy Points:
    38
    The rear housing on the turbo's have also been ceramic coated.

    [​IMG]
     
  12. sevenangrypenguins

    sevenangrypenguins Active Member

    Messages:
    829
    Likes Received:
    7
    Trophy Points:
    38
    Not the best photo's but it's dark in the garage.

    Leather Re-trimmed panels, glovebox, centre console, underdash drivers side, and in the back.
    $500 pick up only

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  13. slydog

    slydog Member

    Messages:
    126
    Likes Received:
    0
    Trophy Points:
    16
    Interior

    PM'd about interior.
     
  14. sevenangrypenguins

    sevenangrypenguins Active Member

    Messages:
    829
    Likes Received:
    7
    Trophy Points:
    38
    Compression test done all cylinders within 5psi, keep in mind the high lift cams will reduce static compression. Engine made 460hp@20psi only a few weeks back on the Godzilla Motorsports dyno.

    I will sell the engine for $3000 with bde/z1 gears, ATI damper and timing belt (200k service was done about 10k ago with ramey Z idler studs and one of those blue kevlar belts.


    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  15. sevenangrypenguins

    sevenangrypenguins Active Member

    Messages:
    829
    Likes Received:
    7
    Trophy Points:
    38
    I put the wrong pic up the end there I gave it a few more cranks and it went up to 150.
     
  16. ABZ300

    ABZ300 G

    Messages:
    3,273
    Likes Received:
    0
    Trophy Points:
    36
    How much for the whiteline front sway bar?

    Abraham
     
  17. sevenangrypenguins

    sevenangrypenguins Active Member

    Messages:
    829
    Likes Received:
    7
    Trophy Points:
    38
    $160 Plus postage.

    Also have a big rear one think the brand was CMR 27mm
    $120 plus postage.
     
  18. ABZ300

    ABZ300 G

    Messages:
    3,273
    Likes Received:
    0
    Trophy Points:
    36
    Thanks for that. How much would it cost to get it posted to 3015 VIC?

    Abraham
     
  19. sevenangrypenguins

    sevenangrypenguins Active Member

    Messages:
    829
    Likes Received:
    7
    Trophy Points:
    38
    Near new centre console surround, ash tray and near new leather boot with red stiching.
    $60 + post.

    [​IMG]

    Gear knob near new.
    $50 + post.

    [​IMG]

    A-pillar finishers near new + near new autometer boost gauge already installed. Selling together.
    $150 + post.

    [​IMG]
    [​IMG]
     
  20. sevenangrypenguins

    sevenangrypenguins Active Member

    Messages:
    829
    Likes Received:
    7
    Trophy Points:
    38
    Gizzmo MS-IBC boost controller near new.
    $180 + post

    [​IMG]

    Series 2 CAS brand new never fitted.
    $250 + post.

    [​IMG]

    Brand new Earls thermostatic oil sandwich plate 10AN fittings with right angle aeroflow fittings, I test fitted it with my setup and it would of fit okay.
    $150 + post.

    [​IMG]

    Innovative wideband controller, comes with sensor that was replaced tnot that long ago. Work great with nistune.
    $100 + post.

    [​IMG]

    ECU is now out. Forgot to say it also comes with boost control solenoid, it just needs some barbs.

    [​IMG]
     
Thread Status:
Not open for further replies.

Share This Page