FS: Bris -VG30 Engine Parts - DET Engines + VQ30 Auto

Hi guys,

I've got a Z32 VG30DE, in parts. I believe the engine failed due to a bearing problem.

I have most parts including :

Inlet manifold, exhaust manifolds, alternator, injectors, coils, heads, cams, block, etc etc.

the parts are a bit dirty - nothing some $2 degreaser won't fix.

post in here for a price, or come take the whole thing for $200 ono...

Located in Brisbane, happy to ship smaller parts at buyer's expense..

Tim - 0422 885894

 

FS : VG30DETT Valve Spring Upgrade

Guys,

I have a Performance Spring VG30DETT Set.

The springs are new and un-used. Bought for a project and now longer required. New these are $250-$300..

Shipped for $200 anywhere in OZ....

Exact Part number and photo to be posted soon (tonite)...

Tim

 

FS Bris : VG30DET Engine - Y31+Y32 Cima Single Turbo Motors

Guys,

I have moved away from VG30's for the time being (trying my luck with a VQ30).

I have the following engine's I'm looking to sell.. I'm describing these as accurately as possible.

Engine 1 - The pick of the bunch.

This was in my Datsun 180b Project and ran very well. It had lifter noise which we managed to flush out, and was sweet. I ran a 13.3 with this engine. No dramas at all.

This engine has no faults that I'm aware off. The project was dismantled around 4 months ago (wasn't a legal conversion). This is a Y32 Cima engine. Alternator, CAS. Has no injectors, can provide top feed rails.


Engine 2 Y31 VG30DET - The 2nd best Engine

This engine was a spare I picked up for the above project. I bought it missing the passenger side exhaust cam from a mate. I pulled the cam out myself, and the engine hasn't been turned over or anything silly.

I have no run this engine, but have no reason to suspect it's in poor condition. Its missing a couple of bolts here and there. More or less complete. This has the stock injectors too.

Engine 3 Y31 VG30DET - The junk motor

This engine was my first in the 180b. The passenger side exhast cam jammed, and pistons hit valves. This still has the inlet and exhaust manfiolds, most of the accesories have been pulled from the engine. Block is a-ok, crank would be fine. I'm not sure about the heads, they may be save-able, I haven't removed them to inspect. The guide for the passenger exhaust cam is a bit chewed out.


Prices?

Engine 1 - $800

Engine 2 -$500

Engine 3 - $100 (Cima heads might be worth it alone for a Z32 engine, supposed to have better ports )


Or buy it all, bring a ute or trailer $1250 in brisbane - call me if u have any questions, I will do my best to help with any questions.

Pics to follow soon (tonite)


Tim - 0422 885894

 

FS : Bris - VQ30DET Auto - Fitted with VG30 Bellhousing

Guys,

Selling off parts of my project.

I have a VQ30DET bellhousing from a 80,000km engine package I bought... I wanted the VQ bellhousing and have swapped onto it a spare VG30DETT bellhousing I had.

The box is a RE4R03A - The loom looks be in good condition.

I'm told these are a great replacement for tired Z32 autos, they shift a bit firmer and are 10 years newer on average.

Pictures available, but we all know what they look like.

Pickup from me in brisbane - $300 ono

Tim -

 

can i get...

ps pump, bracket , all needed gear, also would like the 27mm bolt that holds the harmonic balancer on, where you at in bne?

 

I will take a look tomorow for you...Crank nut shouldn't be an issue...

 

Engine 1


Engine 2



Engine 3



Valve-Springs:





VQ30DET Auto - VG30 Bellhousing:


Z32 VG30DE Engine + Parts:

 

How much for the z32 plenum?

 

$80 for upper and lower intake manifolds?

 

Just this one

 

If you just want the upper than $70... grab both and port match them together for $80.

 

Way too much effort doing the lower plenum. I just want to make it shiny and grind out the clearance for the injectors

 

ok mate, just give send me a txt to let me know when you want to come grab it.


Tim -0422885894

 

If you have a spare DET exhaust manifold Xover pipe would you put that aside for me Tim.

 

is that my old DET motor? from sunshine coast?

 

no mate, not from the sunshine coast..

 

Hi there, i was inquiring about the A/c Pump.

Just touching base with you again.

Cheers,
chris.

 

Hi mate,

The AC pump type that I have is an MJS170.. It mounts the same as any other pump would...I sent you 2 photos of the pump i have... here they are again mate..

here are those pictures again:






Tim

 

Hi Tim.

Im sorry, if the photos were sent to my phone, i havent received them. I appreciate you posting them on here. Sorry to be a hassle about it all.

The pump looks exactly as to what im after.

I presume the condition is unknown?

Apart from what i can see in the second pic, can you spot any rust in the chamber?

And lastly, price. What are you asking? If you're happy to sell.

Regarding shipping if possible, can i get it boxed up and ill organize TNT to pick it up?

Thanks again.
Chris.

 

Hi mate, does motor 3, include the front timing covers coil packs etc? Cheers.