WA Dave's Tech day (Saturday 17th of April)

rear main seal 12279 (this is correct number)
shifter bushes 34139P (x2), 34556 CORRECT
throw out bearing (preventative) 30502 (this is correct number)
clutch pivot ball (preventative) 30537 CORRECT

These parts are easily changed when GB is out, but i havent bothered as all have been in good condition:
32136 rear seal for the GB... still have one here if you want it
32112 front gasket
32113 front seal

Redline lightweight shockproof would be my prefered choice...

 

Thanks Aidan. Yep, I'll grab that seal off you.

Ok, so the full list is:

rear main seal 12279
shifter bushes 34139P (x2), 34556
throw out bearing 30502
clutch pivot ball 30537
rear seal 32136
front gasket 32112
front seal 32113

On top of that, I need to get oil, and some general purpose lubricant.

 

yep thats what you will need...
going through nissan direct tho dont expect change from 250

 

i might pop down as well

 

I think I will come as well. My clutch will last me until my swap so I'll just come down to mingle and learn a bit... Also maybe someone can help me hammer down my rad support, I haven't had any luck

 

Mate I have a new throw out bearing $30, Pilot bush needle bearing $15, Clutch pivot ball $20, these were with the new clutch I got from Tom, I didn't need them as mine were new.
0408953378
Eddie l

 

If I can't get it local, and Nissan is gonna cost me that much, then I am going to have to put this off until I can get the stuff together.

Who should I go through, and any idea how much it will all cost me?

 

Eddie, where do you live? I work in West Perth and can meet you somewhere near the city during the week if you like. That is if you aren't coming down. Free beer and snags

 

Pilot bush needle bearing $15... can get these through nissan for $3.95

 

Ok all, sorry about this, but there's a change in plan.

I am going to get all the parts together first. Once that's done, I will update you all via this post as to when the techday will be.

It will probably be a few weeks.

Sorry to have to do it this way, but I'm on a budget.

Maybe if someone wants a NA engine and my existing gearbox then I can pay for this stuff sooner.

Here's some prices I have already worked out:

Code:

                             Caz             Coz (USD)        Courtesy parts (USD)
rear main seal 12279         $54             $19 (OEM)        $20.48  (OEM)
shifter bushes 34139  (x2)   $10ea           $2.50ea (OEM)    $2.90ea (OEM)
shifter bushes 34556                                          $17.64  (OEM)
throw out bearing 30502                      $32 (OEM)        $37.81  (OEM)
clutch pivot ball 30537      $68 (chromolly) $35 (CZP)        $5.18   (OEM)
rear seal 32136                              $10.50 (OEM)     $10.92  (OEM)
front gasket 32112                                             $5.78  (OEM)
front seal 32113                                               $4.60  (OEM)

 

I now live in Parmelia, I work away all week will be back thursday night.
Eddie

 

damn re read this thread. i was up at 4.30am for work.
sunday might be cool see what happens. or even a meet up at the pub somewhere for lunch

 

if this rescheduals for a few weeks later i might be in...can we fit in a plenum pull & bypass as well?

 

does that mean your gonna try and make the cruise dave, or is the clutch too far gone?

 

Not a good idea to do a PP at someone else's place. If it goes wrong (or takes too long), then you'll be stranded.

A PP will take 2 or 3 guys about 6+ hours.

 

The clutch isn't really that bad - that's why I can reschedule. I'm still driving her to the train station and back, but no burnouts for me

I wasn't going to be doing the cruise anyways, and I shouldn't with this on my mind.

 

Updated prices

Scroll to the right to see the Aussie prices.

I don't think I will need the 34556 part as they have to come from Japan. Doesn't sound to me like they are commonly replaced.

Code:

                             Caz             Coz (USD)        Courtesy parts (USD)  Nissan Aust 
rear main seal 12279         $54             $19 (OEM)        $20.48  (OEM)         $60
shifter bushes 34139  (x2)   $10ea           $2.50ea (OEM)    $2.90ea (OEM)         $6.26ea
shifter bushes 34556                                          $17.64  (OEM)         $32.94
throw out bearing 30502                      $32 (OEM)        $37.81  (OEM)         $47.29
clutch pivot ball 30537      $68 (chromolly) $35 (CZP)        $5.18   (OEM)         $16.14
rear seal 32136                              $10.50 (OEM)     $10.92  (OEM)         $27.03
front gasket 32112                                             $5.78  (OEM)         $21.65
front seal 32113                                               $4.60  (OEM)         $7.19

 

Nissan Aus == ripoff ;\

 

HAHAHAHAHA oi ross.. how long does a PP take?

 

bout that long...........the first time.......

after the first plenum pull and everythings deleted, about half an hour if you take your time.