300zx seat covers make over

High Torque Performance
15 Green Street
Doveton, VIC, 3177

Would be good if you could come in as im from Bendigo, and probably won't be able to view the sample any other time, plus there is going to be many members there, it is going to be on for something like 9am-4pm

 

I FULLY BEAT U 2 IT MAN!!

gggrrrr trying to cut my grass.... again hahaahaha

na all good

 

Here is a quick form below, show your interest, then we decide who is the rep

ACT: ?
QLD: ?
NSW: Bigbaz, ?
NT: ?
SA: ?
VIC: MaxFromAus
WA: Miksta, ?

 

My God!
That?s gone pass Dandenong, to come from Hoppers.
That?s like almost 2 hours each way,

If it was closer I would definitely come to even show the covers in my car, however, seeing the distance, it is depends on the ETA of the samples,

 

how can it be like almost 2 hours each way??
Its gonna take me 2 hours and 20mins from Bendigo to get there

 

Not sure how, blame the red lights and traffic I guess,
The owner of the red 300zx that I have done the seat covers for were in Oakleigh.
For two weekends I did go to him, wasted so much time on traffic, unbelievable, 1.5 hours each way, it wasn?t funny.

Like I said, if I have the samples, I will be there.
There is a good chance it will be arrived by Sat.
FedEx normally takes around 4 days, and the samples will be sent tomorrow.
Sat morning I will check the tracking if it arrived.

Plus, if I drive all the way to past Dandenong, I like my car dynoed as well.

 

ahh ok, hope you can make it..
You might want to send iCER a PM and let him know you want yours dynoed..or just post in the coming events section under Melb dyno day

 

Where can I see this color chart ?

 

that depends on which state you are in

 

As mentioned before, I'm more than happy to take Tassie's... which you left off your list there Max.

 

ACT: ?
QLD: ?
NSW: Bigbaz, ?
NT: ?
SA: ?
TAS: NoZed, ...
VIC: MaxFromAus
WA: Miksta, ?

 

ACT: ?
QLD: ?Black Baz may be your answer here, lots of peeps will be at his charrdy shack gathering
NSW: Bigbaz, ?
NT: ?
SA: ?
TAS: NoZed, ...
VIC: MaxFromAus
WA: Miksta, ?

 

EOI order list
Nickname / Format (2, 2+2) / Outer Colour / Inner Colour / Stitching Colour / Logo Colour (N/A is not required) / Extra material Colour (per sqm)
1) RENZED / 2 seater / Black / White / White / Logo N/A / Extra material N/A
2) spinzzx / 2 seater / Black/ Black / Red / Logo Red / Extra material N/A
3)carzone / 2+2 / beige / beige / beige / Logo N/A / Extra material N/A
4)silver300zx / 2 seater / beige / beige / beige / Logo N/A / Extra material 3m beige
5) SammyK300 / 2+2 / Tan / Tan / Tan / Logo N/A / Extra material 3m Tan
6) Eastern Eye / 2+2 / Black / Black / Red / N/A / N/A
7) ZeDHeD/ 2+2 / Beige / Beige / unsure? / N/A / 3m extra Beige
8) Mafi-Zed/ 2+2 / Black / Black / Red / Red / Extra material N/A
9) tony321/ 2+2 / Black / Yellow / Black / NA / 3m extra Yellow
10) Kac13z32/ 2 Saeter / White / Blue / Blue / Blue / NA
11) Brittonzx / 2+2 / Black / Black / Red / N/A / N/A
12) boo5t/ 2+2 / black / beige / black / beige / N/A extra material as yet
13) MrMagoo / 2+2 / Black / Grey / Black / N/A No Logo/ 3mt extra grey
14) Daz07 / 2+2 / black / black /black or white not sure / white logo / N/A extra material
15) 90TTZ / 2+2 / Black / Dark Green / Black / NA / Dark Green 3 sqm

as requested, changed the stitching coloured to black for 90TTZ

 

I would like to change my inner colour (assuming that refers to what is black in the pics at the start) to white, and I will have the stitching as the same colour as that part of material (ie white stitching on white material, black stitching on black material).

Thanks.

 

EOI order list
Nickname / Format (2, 2+2) / Outer Colour / Inner Colour / Stitching Colour / Logo Colour (N/A is not required) / Extra material Colour (per sqm)
1) RENZED / 2 seater / Black / White / White / Logo N/A / Extra material N/A
2) spinzzx / 2 seater / Black/ Black / Red / Logo Red / Extra material N/A
3)carzone / 2+2 / beige / beige / beige / Logo N/A / Extra material N/A
4)silver300zx / 2 seater / beige / beige / beige / Logo N/A / Extra material 3m beige
5) SammyK300 / 2+2 / Tan / Tan / Tan / Logo N/A / Extra material 3m Tan
6) Eastern Eye / 2+2 / Black / Black / Red / N/A / N/A
7) ZeDHeD/ 2+2 / Beige / Beige / unsure? / N/A / 3m extra Beige
8) Mafi-Zed/ 2+2 / Black / Black / Red / Red / Extra material N/A
9) tony321/ 2+2 / Black / Yellow / Black / NA / 3m extra Yellow
10) Kac13z32/ 2 Saeter / White / Blue / Blue / Blue / NA
11) Brittonzx / 2+2 / Black / Black / Red / N/A / N/A
12) boo5t/ 2+2 / black / beige / black / beige / N/A extra material as yet
13) MrMagoo / 2+2 / Black / Grey / Black / N/A No Logo/ 3mt extra grey
14) Daz07 / 2+2 / black / black /black or white not sure / white logo / N/A extra material
15) 90TTZ / 2+2 / Black / Dark Green / Black / NA / Dark Green 3 sqm
16) NoZed NoMore / 2 / Black or beige (depending on samples) / Beige / Black or Biege / N/A / N/A

 

Just wanted to.......

make it clear that I would only be interested in a 'tan' colour!! .....so hopefully this won't be an issue if more colours become available???
No biege for me thanks!!!


EOI order list
Nickname / Format (2, 2+2) / Outer Colour / Inner Colour / Stitching Colour / Logo Colour (N/A is not required) / Extra material Colour (per sqm)
1) RENZED / 2 seater / Black / White / White / Logo N/A / Extra material N/A
2) spinzzx / 2 seater / Black/ Black / Red / Logo Red / Extra material N/A
3)carzone / 2+2 / beige / beige / beige / Logo N/A / Extra material N/A
4)silver300zx / 2 seater / beige / beige / beige / Logo N/A / Extra material 3m beige
5) SammyK300 / 2+2 / Tan / Tan / Tan / Logo N/A / Extra material 3m Tan
6) Eastern Eye / 2+2 / Black / Black / Red / N/A / N/A
7) ZeDHeD/ 2+2 / Tan / Tan / unsure? / N/A / 3m extra material Tan
8) Mafi-Zed/ 2+2 / Black / Black / Red / Red / Extra material N/A
9) tony321/ 2+2 / Black / Yellow / Black / NA / 3m extra Yellow
10) Kac13z32/ 2 Saeter / White / Blue / Blue / Blue / NA
11) Brittonzx / 2+2 / Black / Black / Red / N/A / N/A
12) boo5t/ 2+2 / black / beige / black / beige / N/A extra material as yet
13) MrMagoo / 2+2 / Black / Grey / Black / N/A No Logo/ 3mt extra grey
14) Daz07 / 2+2 / black / black /black or white not sure / white logo / N/A extra material
15) 90TTZ / 2+2 / Black / Dark Green / Black / NA / Dark Green 3 sqm
16) NoZed NoMore / 2 / Black or beige (depending on samples) / Beige / Black or Biege / N/A / N/A

 

big bad baz .. as much as i would like to help out ..

the charddy shsck show is this coming thursday .. samples will not be available for viewing at the shindig ..!!!!! ...

 

Dont think I will be able to come to dyno tomorrow guys.
I havent received the samples yet.
Hope you have a good day.
Will update very soon

Regards

Max Ungun

 

I have been notified that the samples will arrive on Tuesday

 

Hey there,

Add me to the list...

EOI order list
Nickname / Format (2, 2+2) / Outer Colour / Inner Colour / Stitching Colour / Logo Colour (N/A is not required) / Extra material Colour (per sqm)

1) RENZED / 2 seater / Black / White / White / Logo N/A / Extra material N/A
2) spinzzx / 2 seater / Black/ Black / Red / Logo Red / Extra material N/A
3)carzone / 2+2 / beige / beige / beige / Logo N/A / Extra material N/A
4)silver300zx / 2 seater / beige / beige / beige / Logo N/A / Extra material 3m beige
5) SammyK300 / 2+2 / Tan / Tan / Tan / Logo N/A / Extra material 3m Tan
6) Eastern Eye / 2+2 / Black / Black / Red / N/A / N/A
7) ZeDHeD/ 2+2 / Beige / Beige / unsure? / N/A / 3m extra Beige
8) Mafi-Zed/ 2+2 / Black / Black / Red / Red / Extra material N/A
9) tony321/ 2+2 / Black / Yellow / Black / NA / 3m extra Yellow
10) Kac13z32/ 2 Saeter / White / Blue / Blue / Blue / NA
11) Brittonzx / 2+2 / Black / Black / Red / N/A / N/A
12) boo5t/ 2+2 / black / beige / black / beige / N/A extra material as yet
13) MrMagoo / 2+2 / Black / Grey / Black / N/A No Logo/ 3mt extra grey
14) Daz07 / 2+2 / black / black /black or white not sure / white logo / N/A extra material
15) 90TTZ / 2+2 / Black / Dark Green / Black / NA / Dark Green 3 sqm
16) Z-Force / 2+2 / Beige / Beige / Beige / Logo N/A / Beige 3m Extra Material.

Now, you mentioned eariler that you can get inner or outer stitching. I'm assuming that the Zed in your original post has the outer stitching...correct?

I would like the inner stitching...the same as the ones in the FTO photo's, not the Zed. Should we put this in the above order list?

Cheers
Rob.