Rather thasn going through all the trouble of changing the suspension have you tried loosening all the nuts/bots, jacking up the exhaust and...
I would say that the compressor stills functions as it should......a common problem however is that the front seal leaks (I think someone else has...
I pulled 263rwkw at 16.5psi with these turbos on 95ron fuel. Have since tightend up actuators to get up to 20psi and will re-tune on 98ron to see...
PM sent re coil pack connectors.
BLAZT PCB Wiring Colours [IMG]
I was in the process of asking MR BLAZT if it was ok to share this information. Some people dont like it when you post information onto a forum...
Haha Yeah I was nearly 100% sure that I would not be the only person to have ripped one out before. Turns out the BLAZT guys were more than happy...
Got info from BLAZT so everyone can stop worrying now!!
Is there anyone out there willing to slit the heat shink cover. Pretty please??? Jason
Took my car in for a tune and the guy hooked his hoof onto the end of my USB Blazt cable and pulled the wires out of the little circut board....
If you get a good air-con guy he will be able to put one in from a different type of car. I think I have a magna one or something in mine. They...
I think mine ran a min of about 11-12 or so. I ran the turbos will no boost controller at all and no boost running to the actuators and still...
Anyone know where I can get some 4 bolt flanges?
I have just got mine dynotuned with the nistune ecu and it pulled about a 263rwkw at about 16.5psi on 95ron and about 625Nm torque. I couldnt get...
Can thank my old man actually. I was gonna remove mine and he pointed it out to me. Some of these old guys are quite clever!!
If you have a good look at your old thermostat you will see that it has a "bung" like thing on the end. You cant remove these thermostats because...
No worries that is understandable. Cheers Jason
Shifter Cover I am chasing the bit under the gear boot. It is the part that bolts on with four bolts and has the rubber boot on it that seals off...
PM sent KYB suspension
I have been using the sard 650cc in the stock rail for around 3 years now and havnt had any leaking/seating problems. Everyone seems to think that...
Separate names with a comma.