Car has been Sold Eddie
Yes air-con works fine, New air compressor & condenser installed in 2005. Eddie
1991 300zx TT Motor Rebuild June2008 Eagle Rods, ARP rod fastener kit. ARP head & main stud kit. Wiseco 0.20? o/size forged pistons & Molly...
More info; The car was Dyno tuned on Friday 24th by Tom at PZP 469.9rwh / 350.3KW on 18lb boost. Eddie
Year:[1991] Body 2 seat: [b]Colour:[silver ] [B]Engine (Turbo/NA):[TT] [B]Transmission (MT/AT):[MT 98+] [B]Interior (Cloth/Leather):[Cloth]...
Sounds like you guys had a good day, some of you may have caught the bug. Wiz pity you had issues with 1st to 2nd, you should have tried a 2nd...
Good run Curt & Z32 TT, you guys are holding the fort for the WA cars. Eddie
Have you still got these lifter, if they haven't rusted up I will get them. Eddie
Ya, Know the feeling.
You can have my 11.59et Z for $15k, take the top off & you will get all the wind you want. Eddie.
Guys thanks for your input I have found the CAMS/ANDRA Regs and will follow them. Eddie
Guys I need some info or ideas on where to fit the rear anchor mounts, any of you guys who are running a harness where have you put the mount....
The new P100 fuel from United will the Ethanol cause issues with our fuel system, O-rings, pump, injectors. pressure reg. Anyone tried it yet....
Remove the starter motor then use a large flat screwdriver in the teeth of the ring-gear to stop the crank turning while you undo the crank nut....
No Offence; can give you $350 for the Max 6 clutch, if you have no other offers, little low on $$ at the moment. Eddie
Nothing wrong with the cheap copper plugs I've run platinum & iridium now running BKR7-E cheaper copper plug, 317RWKW 11.89et 120mph 18psi. Eddie
Chris thanks for coming around and checking the tension on the timing belt, I completed putting it together, and she fired up first go, Idles and...
I?ve just installed new lifters, cams and timing belt, I read and followed the tech articles and sure everything is correct but would like someone...
What is the torque setting for the cam bracket bolts, I've looked through the Tech section and manual can't find it. Eddie
My best time, 1/4 Mile ET. 11.89. 1/4 Mile MPH 120.32 hope to improve on this next season. Edie
Separate names with a comma.