http://cgi.ebay.com/ebaymotors/JDM-...ptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories Anygood???????????????????????????????????????????????????? Or not.
don't bother, getting it to fit will be alot of custom work and it'd probably be cheaper to get a proper bolt on kit from UAS and you'll also get quality parts. pretty sure that is just a collection of cheap parts that they have just put together. I thought z32 uses t2 flange, and those turbos are T3 flange and oil cooled only... also the intercooler is single inlet/outlet and the piping would be useless on a z32...
they are cheap korean rubbish. big mods to get to fit will outweigh the initial saving on price, plus WHEN they blow up you'll be up for more for replacements. Apart from that, they're 5 bolt also, so add price for new dumps on top. I'd stay well away.
Have you had a look at the hypergear ones ? If I didn't get those other ones I would have gotten these , being on a budget n all. http://www.aus300zx.com/forum/showthread.php?t=274278&highlight=hypergear http://www.digi-hardware.com/ Good luck
Thanks mate some good reading. Might look into them so how much more power will they give from the stock ones?
Just good power but i dont want to cause any damage to the engine. I am pulling the engine out beacuse i have a turbo seal gone. So while its out i could just do a seal kit through both turbos are get new ones. also new gaskets and 100k kit. i will be gettin a intercooler and i have a turbo back 3" system. So just seeing what options turbo wise is out there at the moment.
just with the 100k kit and gaskets im up around $1800.00 just depends what turbos i can get for the right price or just stick with the stock ones.
If you're sticking with stock injectors, you really only need to look for small turbos. You may aswell look for something like a 4 bolt replacement in this case. and i think bang for buck is with the ATR25's. you may get around 270rwkw out of them before your injectors max out. And they have Garret internals. You don't have many 4 bolt turbo options these days unless you just get your stockies rebuilt and high flowed. Just try to steer clear of these uber cheap korean junk turbos off ebay. Just my AUD$0.02
yes, and according to my calculations: 2 x $750 = $1,500 (pair) Seriously though, i've heard good things about these turbos. lots of skylines put them on, and the best thing that Hypergear has to offer is a DIRECT bolt-on kit for our engine. which is what you really want. This is what i would do if i were you. :zlove:
Might end up going with that cheers mate - shame the olds ones are still good and run well one just needs a seal kit but might as well upgrade while the engine is out.
